gator896 0 Posted February 25, 2000 Has anyone got the SupraSonic II modem to work under Windows 2000? I have tried using the win9x drivers like diamond suggests doing, but the device never gets enabled after rebooting. Any suggestions. thanks Walter Morgan webmaster@nesscity.com Share this post Link to post
SHS 0 Posted February 25, 2000 Disable "COM2" or "COM PORT2" in the Bios then setup the board to PnP Mode on the Modem board. Do a claen install then eveything should work. Make sure you have the rigth Firmware/BIOS You need setup Win95 or 98 to use Firmware/BIOS http://www.diamondmm.com/customer_carete...ra_Sonic_II.htm How check the Firmware/BIOS http://www.diamondmm.com/customer_caretechnical_supportrevisionCommunications.htm DO NOT USE "Shotgun" You should bookmark this page http://www.diamondmm.com/customer_caretechnical_supportCommunicationsSupra_Sonic_II.htm Share this post Link to post
