Mr Leicester 35451 (Monitor)

[b8251213 0]

Dear Leicester 35451

 

This is b8251213 with the monitor problem the quarter inch squares on my monitor screen. You asked for a screen shot that is fine but how do I go about doing that like I said they last 5 to seven seconds.

b8251213

[Wilhelmus 1]

When it starts, quickly hit the print screen button and paste it to eg. paint. If you missed, try again.

 

[b8251213 0]

Originally posted by Wilhelmus:

Quote:

When it starts, quickly hit the print screen button and paste it to eg. paint. If you missed, try again.

 

 

OK help me out I am a novice at this what is E G. Paint. When I opened up this post reply where it reads quick code all 30 of those squares were covered with that quarter inch square numbered one through 20 they'll only flash on approximately five to six seconds. This is a nightmare!

 

If this is any help the monitor is a compusa 17 in. screen model number D.H.-1764 M.

 

Thank-you

 

b8251213 if you would like to e-mail me address follows

barryinvu@earthlink.net

 

[Sampson 0]

I had a Zenith/Heathkit CGA monitor do this. Because it was a Heathkit, it could be tested. It turned out to be a solder connection in the monitor. Actually, it was in the solder itself. Some kind of crystal was formed. Have you tried this monitor on another machine to see if something similar happens? If it does, it is the monitor. If it doesn't, it may be in the video card or possibly the cord connecting the monitor to the card.

[Wilhelmus 1]

By "eg. paint" I meaned, "for example, paint."

(eg = "exempli gratia", for example in latin)

 

 

The Paint can be started via Start->Run->mspaint.exe.

 

<edit>It's been a long day...</edit>

[b8251213 0]

Mr. Wilhelmus:

I findly was able to get a screen shot of the problem,if you could give a e-maill address I will up-load them

Barry barryinvu@earthlink.net

[b8251213 0]

I guess every body has given up on this problem.

Thanks a lot

b8251213

[Wilhelmus 1]

Nope, forgotten.

 

valasaari_NOSPAM_hotmail.com

 

Replace the _NOSPAM_ with @.

[b8251213 0]

When I send you the picture your e-mail address come back as not there.. Please e-mail me your address at barryinvu@earthlink.net

Barry

[Wilhelmus 1]

E-mail sent and removed spam rule...

[b8251213 0]

Valle Alasaari:

Sent you the picture of the Monitor and this is what happen below!!!!!!!!

 

 

This is an automatically generated Delivery Status Notification.

 

Delivery to the following recipients failed.

 

valasaari@hotmail.com

[Wilhelmus 1]

Quote:

Valle Alasaari

That is Ville Alasaari.

I try sending e-mail from other address...

<edit>
E-mail sent at 14:43, GMT+2.
</edit>