Jump to content
Compatible Support Forums

emoate

Members
  • Content count

    2
  • Joined

  • Last visited

    Never

Everything posted by emoate

  1. emoate

    anyone know about over lcocking?

    Over Clocking can be done safe. don't increase cpu volt causes heat and not worth the risk. now you need to increase cpu buss speed but watch your memory speed as you increase cpu buss so will ram speed increase in mhz! now the better the MB the more ajustments you will have! the best way to go is lower your ram speed frist like 800 mhz down to 667 mhz now increase your cpu buss from 200 to 233 mhz this is just me picking numbers to use and a 33mhz jump may be to much but its a place to start again alot of this needs a good MB because your pci,agp,pci-e need to stay at 33 mhz,66 mhz,100 mhz so if your MB don't lock those your not go to OC very far. I have a e7200 45nm stock numbers are 2.53Ghz 266 x 9.5 OC numbers (stock voltage) are 3.2Ghz 400 x 8 Intel cpu's let you go down on muti up to a point. hope this info helps you out. remember leave the volts alone for safe OC
  2. emoate

    Power Now

    Hi! I have a biostar n750a with a 955 be am3 running xp home sp3 and the proper cpu driver installed per amd website. Power now and smart fan turned on in bios but don't work! It did work but I turned it off to do some benchmarking and it has not worked sense any help would be good. I formated HD did clean install no help! I have vista 64 bit on another drive with sp1. I did not see a 64 bit driver on amd web page for vista I'm going to check cpuid for vista 64 cpuz. so I can see if it works on vista.
×