poopster

The graphics card is about 3months old and the same with the ramm? Is it possiable to be the settings in bios?

HI all need some ideas here. I have a ATI9600xt 256mb atlantis graphics card running Windows xp Pro sp2 2x 512 ddr ramm and a 160gig sata hd. 2500+ Amd cpu My problem is that when i am playing Call of Duty2 the comp freezes up and i cant do anything other than reboot. It does'nt do this when I am doing anything eles its just while playing games. Has any one got any ideas I have the latest drivers for the card from the ati site,

HI all need some ideas here. I have a ATI9600xt 256mb atlantis graphics card running Windows xp Pro sp2 2x 512 ddr ramm and a 160gig sata hd. 2500+ Amd cpu My problem is that when i am playing Call of Duty2 the comp freezes up and i cant do anything other than reboot. It does'nt do this when I am doing anything eles its just while playing games. Has any one got any ideas I have the latest drivers for the card from the ati site,

Thanks!!!!!!!!!! Downloaded memtest86+ and ran the tests all came back fine so I messed about with the settings in bios for the mem and its been going the past 24hrs without a hitch, I think the inital problem was the ati drivers that they where getting installed twice for some strange reason so I ran driver cleaner pro and reinstalled, then I changed the mem setings in bios and it seems to have done the trick but now I have a new graphics card and ramm to install LOL. Oh well more fun and games. Thanks a Lot every one for all the advice and help you have given me its been very much appreciated.....

Seem to have fixed that fault with the drivers the ati2dvag.dll. removed the drivers with driver cleaner pro and reinstalled them and that blue screen no longer appears. but another blue screen has come up STOP: 0x0000008E As far as i have managed to find out this fault is due to hardware failure or the settings of either 3 things the Mobo, CPU or the Ram. I am getting a paging error fault as well, this would point to the ramm would'nt it? Just ordered another graphics card saphire 9600xt 256 and a stick of 512 DDR400 to see if that will cure the probs

I have found the problem its a problem with the graphics card its seems to be quite a common problem as i found out on google but trying to find a fix for it aint. Call me stupid but i never turned off the restart on fault option and now i get a blue screen when it crashes out now the fault seems to be something to do with the ati2dvag.dll, thats whats causing the problem does anyone know of a fix? Cheers for all your help people much appreciated!!

No other card but I just thought to hell with it and went in to bios messed about with the mem settings and it seems to be going fine at the moment, also on the plus side its running faster than ever so far so good

Operating System System Model Windows XP Professional Service Pack 2 (build 2600) Enclosure Type: Desktop Processor a Main Circuit Board b 2.20 gigahertz AMD Athlon XP 128 kilobyte primary memory cache 512 kilobyte secondary memory cache Board: nVidia-nForce Bus Clock: 200 megahertz BIOS: Phoenix Technologies, LTD 6.00 PG 06/19/2004 Drives Memory Modules c,d 160.11 Gigabytes Usable Hard Drive Capacity 110.65 Gigabytes Hard Drive Free Space Generic DVD-ROM SCSI CdRom Device [CD-ROM drive] LITE-ON DVDRW SOHW-1633S [CD-ROM drive] SONY CD-RW CRX220E1 [CD-ROM drive] 3.5" format removeable media [Floppy drive] SAMSUNG SP0802N [Hard drive] (80.06 GB) -- drive 1 SAMSUNG SP0812N [Hard drive] (80.06 GB) -- drive 0, rev TK100-24, SMART Status: Healthy 512 Megabytes Installed Memory Slot 'A0' is Empty Slot 'A1' has 256 MB Slot 'A2' has 256 MB Local Drive Volumes c: (NTFS on drive 0) 80.05 GB 68.90 GB free d: (NTFS on drive 1) 80.06 GB 41.75 GB free Network Drives None detected Microsoft Office Document Image Writer Driver on Microsoft Document Imaging Writer Port: Controllers Display Standard floppy disk controller NVIDIA NForce MCP2 IDE Controller Primary IDE Channel [Controller] Secondary IDE Channel [Controller] RADEON 9200 SERIES [Display adapter] RADEON 9200 SERIES - Secondary [Display adapter] CTX 17.7 [Monitor] (17.7"vis) Bus Adapters Multimedia D347PRT SCSI Controller Standard OpenHCD USB Host Controller (2x) NVIDIA® nForce Audio NVIDIA® nForce Audio Codec Interface NVIDIA® nForce MCP Audio Processing Unit (Dolby® Digital) Communications Other Devices 1394 Net Adapter NVIDIA nForce MCP Networking Controller NVIDIA USB 2.0 Enhanced Host Controller USB 2.0 Root Hub Device USB Root Hub The above is a list off what the make up of my pc.. Is there any part of the above that could be giving me a problem?

Nope all for no good still shutting itself down and restarting. Although if I leave it for a while it after it crashes out i can use it for a bit. So that says to me that something is overheating , but the only thing is what? Checked the temp settings for the processor and they are all fine even flashed the bios. still no joy. Is there anything eles on that could overheat and cause the pc to fall over like the ati graphics card would that cause that effect?

Dooh! thats about 48hrs read this thread put some music on and over it went, I hope thats just glitch going to leave it running again and see. If restarts once in 48 hrs I'll be happy.. but have to wait and see

Well thought I would let you know that the pc has now been up for more than 24hrs and aint fallen over yet, Fingers crossed but that S.M.A.R.T option seems to have done the trick so far. Thanks for that with any luck it will keep going......

jmmijo I just read your last post and gave it a blast, restarted and in to bios its was enabled so disabled it. Do you think this will make a difference? Whats that option ment to do? The pc has been running most of the day now and has fallen over once thats before I did the bios though will have to wait and see what happens to it now. but thats the thing it is getting unpredictable. But its getting better.

cc_vader I was thinking along that lines, but I have checked the temps in bios and they all appear to be fine even took the sides off the case and just to let more air circulate still has the same affect. What your sugesting to me makes sense but the temps and the fans are all running fine. I have extra case fans installed just to be safe, the thing still falls over but at the moment its not rebooted itself for 7 hrs. But by no means do I think its fixed it will fall over just a matter of time.. exxccessive, I have formatted installed drivers that have are freshly downloaded. Installed the latest drivers for the board, Graphics card, Nforce drivers, I have got 2 256 sticks of ramm i have tried each on there own. Also tried the same with the hard drives. Removed the dvd and cd drives and tried 1 stick of ramm and 1 hard drive. Even removed the floppy drive. Just bought a 550watt power supply and installed that. and the fault still persists. I'm all out off ideas the only 2 things I think it could be are the mobo or the graphics card.

I have a problem with my pc that it crashes all the time no idea whats making this do it but one thought, Doe's anyone know of any problems with ATI drivers that makes your pc reboot all the time is this possiable?? The Graphics card is a Radeon 9200 8x agp card 128mb..

Just completed formatting and resetting the cpu speeds to manufacture specs reinstalled windows and downloaded new nforce drivers, ati drivers all seemed to be fine then it happened again shutting down and restarting? I am just out off any ideas dont know if its the graphics card, hard drive or the motherboard any more, the only things I am sure about now are the powers supply, ramm, dvdrw, cdrw. Bit by bit, I can see a new pc on the way....