Jump to content
Compatible Support Forums

al92lt1

Members
  • Content count

    15
  • Joined

  • Last visited

    Never

Everything posted by al92lt1

  1. al92lt1

    Lost USB 2.0 - Please help

    I had the same problem and tried the same things. Finally, I went to DEVICE MANAGER and chose UPDATE DRIVER under everything under UNIVERSAL SERIAL BUS controllers that had UPDATE DRIVER in the context menu. I rebooted and all was good.
  2. al92lt1

    GMail invitations

    Anybody that wants a gmail invite, go here http://isnoop.net/gmail/ If you have invites to give, go there also or email the invite directly to gmail@isnoop.net
  3. This is most likely either a bad RAM module or overclocked settings. I had the same problem, I solved it by setting all BIOS settings to default. There are some free RAM testing software applications available online to detect a defective RAM module.
  4. al92lt1

    Help with Drive Image7

    First the bios on the new computer must be set to boot from the CD. Second if the hardware isn't identical on both computers, you will have a driver nightmare and a mess on your hands.
  5. al92lt1

    NTLDR is missing

    NTLDR Missing This error occurs when the partition marked as active does not contain the operating system boot files. The partition for the OS must be a primary partition that has been marked as active. If it is a SCSI, SATA or RAID drive the appropriate drivers need to have already been installed. The boot partition must be located on the disk pointed to in the BIOS boot sequence. The below advice is for single boot systems. Some exceptions apply if you have a dual boot setup.. So, two issues: 1. Having the PC boot from the correct drive, properly partitioned with the boot partition set as "Active". 2. Having the right files in that partition. You can change the active partition using fdisk. And you can change the first boot device (but using an optical drive with a Windows CD to boot from can cause you problems later) in the BIOS. Using fdisk: 1. Boot to a command prompt by using a boot disk (if you have one. Otherwise you can make one from any Windows 95/98/ME PC. 2. At the command prompt, type fdisk, and then press enter. 3. Click set active partition, choose the partition that you want to make active, and then hit enter. 4. Press Esc. 5. Remove the boot floppy disk, restart the computer. Right Files: Using the Recovery Console, copy the Ntldr file from the Windows XP CD-ROM to the root directory of the current active partition. Follow these steps: 1. Start your computer by using the Windows XP Setup floppy disks or by using the Windows XP CD-ROM. 2. At the "Welcome to Setup" screen, press F10, or press R to repair. 3. Press C to start the Recovery Console. 4. Copy the Ntldr file from the Windows XP CD-ROM to the root of your system partition by using the following commands, pressing ENTER after each command: 1. Type cd .. to go to the root of drive C. (Note the space) 2. Type the letter of the CD-ROM drive 3. Type cd i386 to change into the right directory 4. Type Copy ntldr c: 5. Type Exit If the partition was not formatted by using Windows, you might also need to run the Recovery Console fixboot command to make the active partition bootable. After you can boot into Windows, it is recommended that you use the Windows Disk Management snap-in tool to reset the original system partition as the active partition, and then restart the computer. From Microsoft: If the NTLDR is missing or damaged try the Recovery Console. To start the computer and use the Recovery Console to replace the boot sector "Insert the Windows XP Professional Setup CD-ROM into the CD-ROM drive. Restart the computer. If prompted to press a key to start the computer from the CD-ROM, press the appropriate key. When the text-based part of Setup begins, follow the prompts. Press the R key to repair a Windows XP Professional installation. If you are repairing a system that has more than one operating system installed, from the Recovery Console choose the Windows XP Professional installation that you need to repair. Note If you press ENTER without typing a number, the Recovery Console quits and restarts the computer. The Recovery Console might also show valid installations of Windows NT 4.0. However, the results of attempting to access a Windows NT 4.0 installation can be unpredictable. When prompted, type the Administrator password. If you do not have the correct password, or if the security database for the installation of Windows XP Professional that you are attempting to access is corrupted, Recovery Console does not allow access to the local disks and you cannot replace the boot sector. To replace the boot sector, at the Recovery Console command prompt, type: fixboot [drive:] If you do not specify a drive letter, the Recovery Console replaces the boot sector of the system volume. If you need to replace the boot sector of a volume that is not the system volume, then you must specify the appropriate drive letter." ... More Microsoft NTLDR Help "Using Recovery Console enables you to recover from the following problems: Corrupted or deleted startup files caused by incompatible software, user error, or virus activity. Disk problems related to damage to the master boot record (MBR), partition table, or boot sector on x86-based systems. A partition boot sector overwritten by another operating system's setup program. If critical system files, such as Ntldr or Ntoskrnl.exe, are missing or corrupted, you can restore them by starting Recovery Console and copying fresh files from the Windows XP Professional operating system CD or other removable disk media." More One user has written in with this feedback: "I recently encountered the above mentioned 'NTLDR is missing' error while starting up my pc and found the solution on your site. Thanks, people! Thing was, all the time I had a floppy in my floppy drive. And my pc is set up to have it's primary boot device be the floppy drive! Maybe you can add this tip to your page- make sure there is no floppy in the drive!" Alan al92lt1@gmail.com
  6. al92lt1

    HELP!!! PRINTER PROBLEMS

    If it's new, why not call HP while it's still under warranty?
  7. al92lt1

    hide my IP

    What are you up to? Why do you want to hide your IP address? Are you a script kiddy wannabe?
  8. al92lt1

    GMail invitations

    I have 6 available
  9. al92lt1

    Windows XP Service Pack 2 Release Candidate 2

    I tried it, it slowed my system down. It fortunately can be uninstalled via ADD/REMOVE programs, but it leaves shortcuts, icons and files scattered all over the place. It has some interesting features, like the new Windows Update and the Security Center, but I'll wait for the final release. Fortunately I had an image to restore my system. Be afraid, be very afraid....
  10. al92lt1

    What video card do you want?

    ATI Radeon 8500
  11. al92lt1

    ICQ and a Linksys DSL Router

    Firewall Settings Requirements: For ICQ to successfully work behind a firewall the following system configurations must be set by the System Administrator for the systems network. Client to server Communication: This is done via port 5190 TCP to login.icq.com (please note- allow a bi-directional connection to the port for login.icq.com and not any specific IP address, since it stands for more than one IP address). Client to client communication: Client to client connection is done using the TCP protocol, using port range 1024-65535. This means that the client needs an open listening port within the mentioned range-- 1024-65535. If your Network firewall settings meet the above requirements, you do not to need to configure ICQ to work behind a firewall. In the event that your systems network has difficulty setting the above ICQ firewall requirements you may wish to check some of the possibilities below for finding a solution to your firewall problem: The TCP Listening Port range is too large Minimize the range. you can open a smaller range on your firewall, and then you must configure ICQ to work through the specific port range you have dedicated. In the event you cannot open any TCP listening port If you cannot open the TCP listening port but you can open a bidirectional TCP connection to the internet, configure ICQ to work with no listening port. Note: Communication between LAN users and any Internet user who cannot open a listening TCP port cannot be accomplished. To prevent this from occurring use Socks4.x.x or Scoks5.x compatible firewalls. This requires the use of a proxy server (Socks4.x/Socks5.x.x). The ICQ client must have access to the Socks4.x/Socks5.x.x server, and the server must have full access to an Internet connection, including opened listening TCP ports. The Socks server acts like a bridge to the Internet and ICQ is the pedestrian. Otherwise, HTTPS will not be able to carryout peer to peer connection. This means that a web proxy (client) may relay a request to the web servers, but it will not be acknowledged by the servers, therefore no answer will be given to the information request. Your connection to the Internet is done using IP-Masquerading This means you cannot open any listening ports, and you need to use the basic firewall configuration. Once again,using this option your users will not be able to communicate with any user who cannot open a TCP listening port. To solve this problem use Socks4.x or Socks5.x Proxy server. View ICQ with Socks4.x configuration View ICQ with Socks5.x configuration View ICQ with HTTPS configuration If you wish to share any comments you have on this issue, You can post them on the ICQ Message Boards.
  12. That's how I did it, Wolf. Works perfectly.
  13. Perfect condition. Manual and software/driver CD included. I will pay shipping in US. Escrow or Paypal ok.
  14. al92lt1

    help

    MFC, who told you that XP came with an antivirus program? That's news to me.
  15. al92lt1

    WinFax PRO 10.0

    Perfect condition, I will pay shipping in US. Escrow service or paypal ok. $50.00 firm.
×