Jump to content
Compatible Support Forums
Sign in to follow this  
Silwer

Windows not load (not soft problem)

Recommended Posts

I have serious problem, windows is not loading in normal mode but it loads without problem in safe mode.

Computer was checked by computer spe[censored]t (He said that everything is ok and he dont know why windows is not loading)

Hdd was formated and windows was installed about 15-20 times last month. Even after reinstall windows dont want to load normally.

Hardware checked:

VGA, HDD, CPU, RAM, wires, that thing which produces power to pc (I dont know how does it call in English) Bios and other motherboard stuff was rewritten new.

No problems found.

 

XP stops loading in this place

http://www.bartdesmet.net/images/bootlogo_xp.jpg

and after that you can wait for hours, until you push restart.

 

XP does not show any errors

 

Soft is new, so it should not be a windows problem, hardware is almost all checked too.

 

Any ideas where the problem could be?

 

 

Oh and I forgot

After first time it happened, it was a blue screen with message

 

 

 

A problem has been dected and Windows has been shut down to prevent damage to your computer.

 

The problem seems to be caused by the following file: PartMgr.sys

 

PAGE_FAULT_IN_NONPAGED_AREA

 

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

 

Check to make sure any new hardware or software is properly installed.

If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need.

 

If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.

If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

 

Technical information:

 

*** STOP: 0x00000050 (0xF8A414AB,0x00000000,0xF8A414AB,0x00000000)

 

*** PartMgr.sys - Address F8A414AB base at F8A3F000, Datestamp 00000000

 

I have already posted this topic in other forum, and there one guy offered to me so solutions but non of them worked.

 

Here is the link

http://www.geekstogo.com/forum/Windows-not-load-not-soft-problem-t231054.html

 

Intel Pentium HT 3400 MHz (Prescott)

Main board (Intel Avalon G915GAV)

VGA (Asus EAX600XT-TD)

 

Any thoughts what could be wrong?

Share this post


Link to post

I just get another blue screen message, while I was listening to music, sending files, surfing on net ....

(I was dont everything in safe mode)

 

***STOP: 0x0000008E ( 0x00556000, 0xEC914B28, 0x00000000 )

 

Beginning dump of physical memory.

Share this post


Link to post

A 0x8E seems to indicate some ram issues, take a look at this Microsoft KB search for more information.

 

It found 25 matches but I think the top finds are most likely going to help you.

 

I would recommend getting Ultimate Boot CD and burning it to a disc and running that. Then from the menu select Motherboard Diagnostics and Memtest and see if this finds any faulty memory sticks.

Share this post


Link to post

If you have 2 memory sticks, try 1 at a time.

Sound like a memory problem to me.

Share this post


Link to post

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×