Problem installing my XP PRO

[chronicblue 0]

I am having the same problem as well, when I try to install my windows XP PRO a blue screen appear and shows

IRQL_NOT_LESS_OR_EQUAL

 

I restarted my pc and again it shows

 

PAGE_FAULT_IN_NONPAGED_AREA….

 

So I disable the entire feature in my bios such as LAN, USB, Cache L and etc. Beside, I also remove my one of my hard disc and my CDRW. After this, I try to install my XP PRO again. And it start work just find, but half way thru……a big blue death screen appear again. This time, it said

 

“Stop: 0x0000007B”

 

Oh my God…..pls help…..what wrong with my pc……Anyone out there pls help me.

help is appreciated

 

My system spec:

 

- P4 2.8

- MSI VIA PT880 Motherboard

- 2 x 512 (400 MHz)

- WinFast A340 TD (128MB DDR)

- 2 x hard disc (120G and 160G)

- 1 x DVDw

- 1 x CDW

 

 

pls help me........ :x :x ;( ;( ;(

[thatsteveguy 0]

did you try to install with only one stick of RAM?

 

S

[Wilhelmus 1]

"STOP: 0x0000007B (parameter1, parameter2, parameter3, parameter4) INACCESSIBLE_BOOT_DEVICE"

 

Are your HDs SATA or PATA?

If SATA, did you install the driver for it while installing? "Press F6 if you have to install a third-party SCSI or RAID driver."

 

SCSI? Check SCSI chain for correct termination.

 

How did you format the HD? Quick? Use complete.

 

Loaded fail-safe settings in BIOS and the disable all addons,like sound card, nic, etc. ?

 

Run memtest86, to check your memory.

[chronicblue 0]

Originally posted by thatsteveguy:

Quote:

did you try to install with only one stick of RAM?

 

S

 

 

Yes, i removed one of the ram and try to install wif only 1 ram. but the same thing happened. Some time it said PFN_LIST_CORRUPT.....

 

what is that mean......

 

 

[chronicblue 0]

Originally posted by Wilhelmus:

Quote:

"STOP: 0x0000007B (parameter1, parameter2, parameter3, parameter4) INACCESSIBLE_BOOT_DEVICE"

 

Are your HDs SATA or PATA?

If SATA, did you install the driver for it while installing? "Press F6 if you have to install a third-party SCSI or RAID driver."

 

SCSI? Check SCSI chain for correct termination.

 

How did you format the HD? Quick? Use complete.

 

Loaded fail-safe settings in BIOS and the disable all addons,like sound card, nic, etc. ?

 

Run memtest86, to check your memory.

 

I'm using PATA, and I already unpluged all the LAN cable, Sound cable, and etc. Only Monitor, Power supply and keyboard are pluged.

 

I use NTFS to format my HD. Normal one, not quick.

 

I also disable all add ons.

 

*****But how to "Loaded fail-safe settings in BIOS"*********

 

When i done all this....all look like going fine...but after my computer finish copying system files from Windows XP CD. The death blue screen come out again with error

 

STOP : 0x0000007B.

 

I also removed CDRW and additonal harddisc...so at the momment only 1 hard disc and 1 DVD rom running.

 

But i also get the same problem.....help

SOS.sOS

 

[thatsteveguy 0]

Your power supply may be faulty. do you have access to a spare one that you could try?

 

S

[theefool 0]

Is this the pt880 Neo or the pt880 Neo-FSR?

 

Also, have you gone into the bios and disabled RAID? The drive may be plugged into one of the raid enabled IDE connectors. I had an old board that didn't have raid, but I had to install a driver for the controller b4 I could install windows. Went through the same situation that you are going thru.

 

 

[Exxccessive 0]

have your motherboard checked.

 

had the same thng before and it turned out to be a problem with the mother board.

 

or boot with a 98 cd..

 

delete the partition

 

create a new one

 

then try to install

[chronicblue 0]

Originally posted by thatsteveguy:

Quote:

Your power supply may be faulty. do you have access to a spare one that you could try?

 

S

 

I'm using the new power supply. I did try the PSU (power supply unit) on my fren pc.

And it work.....

[chronicblue 0]

Originally posted by exxccessive:

Quote:

have your motherboard checked.

 

had the same thng before and it turned out to be a problem with the mother board.

 

or boot with a 98 cd..

 

delete the partition

 

create a new one

 

then try to install

 

I'm using PT880 NEO.....

i think the motherboard bios is not upto date....anyway can i upgrade my motherboard bios??

[theefool 0]

http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=527&kind=1

 

version 1.9 is the latest bios revision....

[American Zombie 0]

Almost always these errors are from bad power supply or ram.

 

Since you say PSU is new then I would check the ram with Memtest which was already suggested by Wilhelmus.

[Wilhelmus 1]

On memtest, one error is too much. Let it run for couple hours, like over night. Test the sticks one by one.

 

To 'install' memtest, download the ISO file from the website on American Zombie's post, burn it to CD, set CD/DVD to primary booting device in BIOS, boot from memtest CD. You can use free Deep Burner to do this:

http://www.deepburner.com/?r=download

 

[Ex|AcT!! 0]

Disable power management in BIOS then try to install the windows xp.

In some cases that works.