Cancerman 0 Posted August 21, 1999 Hi Everyone, I've a problem here, when I open System->Hardware->DeviceManager->DisplayAdapter->VoodooBanshee-> Resource. I do not find Any IRQ assigned to this card... (a CLab's Banshee PCI). However, the properties report NO Conflicts!! The resource only report 3 Memory range and 3 input/output range. Does Win2K use IRQ at all? I saw an option in the Bios of my motherboard, which let me choose either asign IRQ for VGA or Not... It's is choosen to be ENABLED. So what does that means? do I've IRQ conflicts? Thanks! Cancerman I'm running an AOpen BP6 Motherboard 2Celeron 366, o/c to 550Mhz. I've 2 SCSI cards on PCI Slot 1 and 2, the Banshee is one PCI slot 3, SBLive on PCI slot 5 and a Zoom Internal 56k modem on the 2nd ISA slot. No usb attatched. disabled the two UDMA 33 hd controller, can't disable the UDMA66 one under bios. Share this post Link to post
SHS 0 Posted August 22, 1999 If Video card is work above 16 color's I would not mess with it. Yes you have to asign IRQ for VGA if want IRQ. Share this post Link to post