Jump to content
Compatible Support Forums
Sign in to follow this  
Milamber_NZ

Sound card issues

Recommended Posts

I have a Diamond MX300 (Vortex 2) card in my System, and I have incredibly low volumes. I have to turn ym speakers up to around the 70-80% mark to get any decent volumes, and get quite a bit of crackling and sound loss in XP RC1

 

Perhaps the Card itself is dying, and if so what do you recommend? Im not gonna buy a Creative P.O.S, and a Santa Cruz is like $450 in New Zealand (and thats Wholesale too!)

 

Any ideas?

 

System Specs.

 

Celeron 667 @ 833

ASUS CUBX

256 MB PC133

GeForce 2 GTS (32 meg) 14.20 Detonators

Diamond MX300 (Default XP drivers)

3COM NIC

IBM DMA66 HDD (13.5)

Share this post


Link to post

I'll go ahead and put the obvious, which you've probably already checked. Check your Windows volume settings. Make sure that the master volume is turned up.

 

As for the crackling, this is often caused by DirectX hardware acceleration. Go to RUN and type dxdiag. Select the Sound tab and turn acceleration off.

Share this post


Link to post

Well, my SBlive Player 5.1 works fine for me even in XP.

Share this post


Link to post

I found the issue of the volume thing in another forum somewhere.

 

It turns out that the Front/rear speaker fader is set towards the back by default by XP, and if you turn on the AC97 controls and select the front/rear fader slider and slide it all the way forward the issue is solved.

 

This of course does make sense, but as to why MS set the fader to the back by default and made it so hard to find is another mystery.

 

Mike

Share this post


Link to post
Quote:

Well, my SBlive Player 5.1 works fine for me even in XP.



have u managed to get the audioHQ/liveware stuff working 100%? i cannot access the speaker config so i cant use my surround setup frown


gib

Share this post


Link to post

It took upgrading to Winxp to finally get rid of my sound issues on my duallie rig.

 

Abit vp6

dual p3 700 oc'd to 933

1 gb cas3 pc133 (generic)

asus v7700 32mb geforce2 gts

Sb5.1 platinum

3com 3c905b 10/100 nic

texas instruments firewire card

adaptec 29160

ibm 18gb u160 SCSI (10,000rpm)

ibm 9gb ultr2 scsi (10,000rpm) x 2

ibm 20gb ultra 100 ide (7,200rpm) x 2 in raid 0 on highpoint controller

ibm 60gb ultra 100 ide (7,200rpm)

plextor 12x10x32 ide

plextor 8x20 SCSI

pioner 16x dvd slot

ls120 superfloppy

Share this post


Link to post

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×