news 28 Posted July 20, 2014 Dear editor, We have just posted the *BIOS Option Of The Week - AGP Comp. Driving*. Quote : Since 1999, we have been developing the BIOS Optimization Guide, affectionately known as the BOG. From a meagre beginning of a single page, it now covers over 440 BIOS options. As old BOG readers will know, we started offering two editions of the BOG since Revision 8.0 - a simplified edition and the complete edition. Normally, the complete edition is only available to subscribers who help sponsor the development of the guide through a small fee. However, that changes today! From now on, we will post a BIOS option from the complete edition of the BIOS Optimization Guide every weekend. This week, we will be taking a look at the *AGP Comp. Driving* BIOS setting. Here's an excerpt : " *The auto-compensation circuitry has two operating modes. By default, it is set to automatically compensate for the impedance once or at regular intervals by dynamically adjusting the AGP drive strength. The circuitry can also be disabled or bypassed. In this case, it is up to the user (through the BIOS) to write the desired drive strength value to the AGP I/O pads. When you set this BIOS feature to Auto, the AGP drive strength values are obtained from the auto-compensation circuitry. Normally, this is the recommended setting as it allows the AGP controller to dynamically adjust for motherboard impedance changes. However...*" Link : *http://www.techarp.com/showarticle.aspx?artno=606* <http://www.techarp.com/showarticle.aspx?artno=606> Icon : *http://www.techarp.com/article/BOG_Weekly/BOG_weekly_big.png* <http://www.techarp.com/article/BOG_Weekly/BOG_weekly_big.png> We hope you will post this news on your website. Please feel free to send your news to news ( -at -) techarp.com and we will reciprocate. Thanks! *Team ARP* Tech ARP : *http://www.techarp.com/* <http://www.techarp.com/> Tech ARP : *http://techarp.com/* <http://techarp.com/> -- Share this post Link to post