Lactic.Acid
-
Content count
40 -
Joined
-
Last visited
Never
Posts posted by Lactic.Acid
-
-
Whether you have a domain name registered or not doesn't matter. These services provide DNS functionality and features. Most domain name registrars only provide rudimentary DNS service (ie. you input your IP, or you enter the DNS entries for your host) whereas these services allow a wide variety of things, from "generic-name.domain.com" to point at your PC, to a domain name pointed at your pc, to MX setup for DNS to run a mail server, to web hopping (EveryDNS does this, and this would be used to point somewhere like www.geocities.com/blah/blah) etc. etc. Not to mention the ability to automatically update your IP address if your ISP re-allocates IP addresses.
Incidentally, EveryDNS has renamed themselves to EveryBox, expanding (or planning on future expansion) into further services. You can reach them at www.everydns.net still, or http://www.everbox.com. These guys are definitely worth a look...
/L.A
-
I've heard people say both that it made a huge difference and that it made no difference at all. It seems that QoS is only used though, if you run applications that utilize it, and have hardware (NIC, switches, hubs, etc) that also support it. You can feel free to remove it, but it shouldn't make a huge difference; of course it can't hurt, either.
/L.A
-
Totally Tubular!
/L.A
:edit: So this isn't a totally dumbass comment, I may take this and work with it, possibly present it to my boss as a solution for our workstations...will depend on what I can do with it and how you license this, and how my boss feels about it =) :/edit:
-
Nope, not anything made public at least. As long as you're patched up with everything you're running (including IIS--if you don't know how to use IIS for website hosting securely, stop now and read up on it) you're fine, as far as anyone knows. Unless it's something new and not released yet, of course.
/L.A
-
AFAIK you can't run a domain with a workgroup. It's one or the other. If it's a client you're trying to change, that's a bit different, but if this is the DC then you can't switch that without demoting using dcpromo. You may want to move this to networking though, since this is purely networking, not applications =)
/L.A
-
If your motherboard supports ACPI it is possible your computer allows your networking interface to be turned off to save power. My work computer is not ACPI so I can not quote exactly where to find these settings, but I'm fairly sure it's under the device properties in the device manager. If you disable that, it could alleviate the problems you're having.
It's fairly different, but at my work, we've had problems with network/db connections being lost when the hard drive spins down on win95/98 machines. When this happens, the connection will not reset until you reboot. Perhaps this could affect things as well?
/L.A
-
http://www.eventid.net/display.asp?eventid=36872&source=schannel:
As per Microsoft: "This event is logged when a server application (for example, Active Directory) attempts to perform a Secure Sockets Layer (SSL) connection, but no server certificate is found. Server certificates are either enrolled for by hand or are automatically generated by the domain's enterprise Certificate Authority (CA). In domains where no enterprise CA exists, this is an expected event and you can safely ignore the message. "
See Q261196
All the info I can find =)
/L.A
-
whoopsie. www.eventid.net was the right url.
If the shares are AD shares and not simple shares, and your clients see the shares, the client is logging on, most likely. Depending on the errors you're getting of course. I think you'll have to add the printer on your client as an AD object as well, for other clients to see it.
[This] probably means that the workstation might have lost its own account and the workstation is no longer "trusted" by (or rather, a member of) the domain and that can happen, but in a Win2K AD you can try to either reset the account by right clicking on the computer in AD Users and Computers and selecting "reset account," or make it join a workgroup, and then rejoin. But this seems to indicate that it won't work, though it normally does. Just delete the old account and let it cycle out of the domain while your client is not a member.
(clutch)
We can try to figure something else out if this doesn't work for you.
/L.A
-
Sounds like your connection isn't terminating properly when you disconnect/reconnect. Any warnings/errors in your Event Log?
/L.A
-
First, for the event id, check www.eventid.net ::edited the url so it was correct:: to see what info they have around for your error. Next, are you running peer to peer / workgroup? A domain? Active Directory? Using DNS? DHCP? Your problems could stem from one, a few or all of these, if missing a setting.
If you search for the printer, will any of the networked machines find it?
/L.A
-
What version of NAV are you using? I ran this before and never had shutdown issues. The fact that the "End Task" menu comes up implies to me that a program has crashed but not terminated, or is "Not Responding" as MS puts it. If this program is Norton AntiVirus, and it is actually locking up before you shut down, you may as well stop using it. If it's just hanging when you go to shutdown, try exiting NAV before shutting down, or alt-ctrl-del and kill NAV before you shutdown.
/L.A
-
Well, this is under warranty, so I would consider calling LinkSys and get a new access point and/or card sent to you to see if that works. Or perhaps they can address the issue. Yes, yes, I know it sucks waiting on hold, but sometimes it actually solves the problem.
/L.A
-
I stand corrected! =) My apologies
/L.A
-
Okay. A few things here. First, lose the first line in the script. Next, this should be a .bat file, and the way I understand it, it should be named shutfast.bat and you would run this by typing "shutfast shutdown" or "shutfast reboot" at a command prompt.
[size:9]
@echo off
net stop "computer Browser"
net stop "Messenger"
net stop "Net Logon"
net stop "NT LM Security Support Provider"
net stop "plug and play"
net stop "Protected Storage"
net stop "Remote Access Autodial Manager"
net stop "Server"
net stop "Spooler"
net stop "TCP/IP NetBIOS Helper" /Y
net stop "Workstation"
if %1==reboot goto reboot
shutdown /1 /Y /t:0
exit
:reboot
shutdown /1 /Y /t:0
exit
[/color]
The last thing I'll say is this will not shut down faster than it takes you to go to Start->Shutdown. Not only that but if your system is configured weird in any way, this could just crash your computer rather than shut it down.
-
I think the %1 means the first parameter, so if you typed "shutfast reboot" then it would skip to the reboot section at that point, which adds the /r switch to the "shutdown" command, telling it to reboot. If you typed "shutfast shutdown" it would leave out the /r, shutting the system down.
If you wanted this to be JUST a shutdown script, you could remove that second paragraph and replace it with this:
shutdown /1 /Y /t:0
exit
and then all you would have to type is "shutfast" to shutdown the computer.
/L.A
-
This is a fun process, as Clutch can attest to =) as he more or less held my hand through it, but once you get the kinks worked out, it's great! Ask me for help (or just post here =) and I'll do what I can for ya, test my own knowledge of what I did.
/L.A
-
I think I speak for all when I say, "What?"
/L.A
-
Junglizt: It's possible the update is already installed/newer, depending on what it is of course. I've had some issues downloading driver updates when I had newer drivers than what WinUpd thought. If it's a system/security update, you can download them by hand and install them that way.
Droney, and Junglizt too: It's also possible that the site was just being worked on or were down at the time, and weren't behaving properly. Droney, did WinUpd work in one OS and not the other? Or did both goof up on it?
/L.A
-
[size:9]ZEUS [AD controller]
Win2k Server SP2
Gateway GP7-450 PIII 450
384MB PC100 SD-RAM
13GB ATA66 5400 IDE HDD
Compaq Smart 2SL SCSI/RAID Controller
4x18.2GB 10,000 RPM SCSI Drives in RAID0 array
Generic 24x CD-ROM
Floppy, unplugged
Internal ZIP100 Drive, unplugged
nVidia TNT Video
On-board SB64 sound
2xIntel 10/100 Pro+ Management NICs
Cable Modem, Connection to LAN
POSEIDON
WinXP Pro Corp
Soyo K7V Dragon Plus!
AMD XP 1700
256MB PC2100 DDR-RAM
15GB ATA66 5400 IDE HDD
Sony 8x4x32 CD-RW
Generic 6x DVD
nVidia GeForce2 Ti Video
On-board c-media digital sound
On-board LAN, Disabled
Intel 10/100 Pro+ Management NIC
LAN Connection
ARIES [Laptop]
IBM 380ED
Win2k Pro
Pentium 200 MMX (I think)
48MB RAM (I think)
A few gigs HDD
CD-ROM
Floppy Drive
3com 10/100/33.6Kbps Lan/Modem
LAN Connection
The laptop is free from work, never bothered checking it out that much. Used for papers only, so far. Will also be used for "in the field" (Read: coffee shops) Computer Science assignments.
/L.A[/color]
-
What's the update for? My Intel NICs always show up as needing a driver update, but the driver I'm using from intel is 5.x I think, and the one WinUpd wants me to have is 3.x, so it may just be that WindowsUpdate isn't finding the driver version right.
/L.A
-
Here's what ya do. Move your mouse over the top edge of the taskbar until you get the Up-Down arrows as an icon. Left click and drag up until your start bar snaps to the next position. Then, move your quicklaunch all the way to one side and it should re-align so it takes up both rows partially. If you use the Address field on your taskbar, you may want to make it three tall instead of two, as that wants to take a whole row most of the time. You're left with two full rows minus the quicklaunch for your task buttons. Sorry if this is patronizing, but some people don't realize you can do this. Note that repositioning the items in your taskbar may take some fudging around. And you'll have to unlock the taskbar to do this.
/L.A
-
A hard drive will work, yes. But do you want to use one? A tape drive is a chunk-o-change up front, but tapes are not all that expensive, and you can create more than one copy to do offsite backup (or large-scale file transfer with friends/associates, should you wish it). Plus, if someone just happens to walk by that shelf with a high-powered magnet...well, maybe not. But if it fell off the shelf? There goes your drive and all your backed-up data. With tapes, you'd be able to create chronological back-ups, like once a week and you move one set off-site once per month. My poor (read: can't afford a tape drive either) ***' My $0.02
/L.A
-
You'll be fine with 7200. I would steer clear of IBM 75GXPs still though. There were some serious issues with those drives dying after only a few hundred hours of use (i.e. a few months, less than a year, etc etc) and I have not heard if IBM resolved those issues yet or not. Any other (esp. WesternDigital) should treat you rather kindly.
/L.A
-
"Buy" a copy of Diskeeper. That reboots and defrags without WinXX running, so it can move everything.
The problem is when you're running an OS, certain files are always used and the OS can't just stop using them. kernel32 for instance. If Windows stopped using the kernel it would go haywire (and we all know Windows never goes haywire otherwise, right?). Because of that, the file can't be moved, copied, accessed, looked at with a funny face, etc. without Windows bombing out on you.
/L.A
IIS Directory Access Control
in Networking
Posted
Here's the deal. I'm employed by a security consulting firm, and we do penetration testing with a side of social engineering. Part of our social engineering is sending out an email to employees of the client du jour, asking them to go to a survey website and "log in." (every person that goes to the site has used their network login, thankyouverymuch!)
The biggest headache we have with this is configuring and reconfiguring IIS for each client. We have to lock out who can access that site, as we are not allowed to disclose other clients without prior permission. So, we do access control by source IP for the main site, but we only test one company at a time.
What we would like to do is have the ability to hit several clients at once, and I see two ways. First, register different domains that look like the client's company name (more effective, not extremely expensive until you consider how many clients we have, but then you consider how much we bill...) Then just set different sites up and check the header for incoming requests.
The other option is to just do our-domain.com/client-name-here and do access control to each directory based on IP. This is the thing I'm not sure we can do though. And there's potential information leakage when someone goes to /client-1, gets the site, tries /client-2 and gets directory not found, then tries /client-3 and gets access denied. They now know that client-3 is a client of ours.
Any ideas on all this?