Jump to content
Compatible Support Forums

gwr

Members
 View Profile  See their activity

  • Content count

    4

  • Joined

  • Last visited

    Never

Posts posted by gwr

  3. Posted

    $ dmesg

     

    Quote:
    Linux version 2.6.3-7mdk (nplanel@n3.mandrakesoft.com) (gcc version 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)) #1 Wed Mar 17 15:56:42 CET 2004

    BIOS-provided physical RAM map:

    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

    BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)

    BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)

    BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)

    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)

    255MB LOWMEM available.

    found SMP MP-table at 000fb940

    hm, page 000fb000 reserved twice.

    hm, page 000fc000 reserved twice.

    hm, page 000f6000 reserved twice.

    hm, page 000f7000 reserved twice.

    On node 0 totalpages: 65520

    DMA zone: 4096 pages, LIFO batch:1

    Normal zone: 61424 pages, LIFO batch:14

    HighMem zone: 0 pages, LIFO batch:1

    DMI 2.3 present.

    ACPI: RSDP (v000 AMI ) @ 0x000fa8f0

    ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x0fff0000

    ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x0fff0030

    ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x0fff00c0

    ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000

    ACPI: PM-Timer IO Port: 0x808

    ACPI: Local APIC address 0xfee00000

    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

    Processor #0 6:10 APIC version 16

    Using ACPI for processor (LAPIC) configuration information

    Intel MultiProcessor Specification v1.4

    Virtual Wire compatibility mode.

    OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE00000

    I/O APIC #2 Version 2 at 0xFEC00000.

    Enabling APIC mode: Flat. Using 1 I/O APICs

    Processors: 1

    Built 1 zonelists

    Kernel command line: BOOT_IMAGE=linux ro root=305 devfs=mount acpi=ht resume=/dev/hda6 splash=silent

    bootsplash: silent mode.

    Initializing CPU#0

    PID hash table entries: 1024 (order 10: 8192 bytes)

    Detected 1667.402 MHz processor.

    Using pmtmr for high-res timesource

    Console: colour dummy device 80x25

    Memory: 255332k/262080k available (1816k kernel code, 6012k reserved, 849k data, 272k init, 0k highmem)

    Checking if this processor honours the WP bit even in supervisor mode... Ok.

    Calibrating delay loop... 3301.37 BogoMIPS

    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

    checking if image is initramfs...it isn't (no cpio magic); looks like an initrd

    Freeing initrd memory: 132k freed

    CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000

    CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000

    CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f

    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

    CPU: L2 Cache: 256K (64 bytes/line)

    CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020

    Intel machine check architecture supported.

    Intel machine check reporting enabled on CPU#0.

    CPU: AMD Athlon XP 2000+ stepping 00

    Enabling fast FPU save and restore... done.

    Enabling unmasked SIMD FPU exception support... done.

    Checking 'hlt' instruction... OK.

    POSIX conformance testing by UNIFIX

    enabled ExtINT on CPU#0

    ESR value before enabling vector: 00000080

    ESR value after enabling vector: 00000000

    ENABLING IO-APIC IRQs

    Setting 2 in the phys_id_present_map

    ...changing IO-APIC physical APIC ID to 2 ... ok.

    init IO_APIC IRQs

    IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-17, 2-20, 2-21, 2-22, 2-23 not connected.

    ..TIMER: vector=0x31 pin1=2 pin2=0

    number of MP IRQ sources: 18.

    number of IO-APIC #2 registers: 24.

    testing the IO APIC.......................

    IO APIC #2......

    .... register #00: 02000000

    ....... : physical APIC id: 02

    ....... : Delivery Type: 0

    ....... : LTS : 0

    .... register #01: 00178002

    ....... : max redirection entries: 0017

    ....... : PRQ implemented: 1

    ....... : IO APIC version: 0002

    .... IRQ redirection table:

    NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:

    00 000 00 1 0 0 0 0 0 0 00

    01 001 01 0 0 0 0 0 1 1 39

    02 001 01 0 0 0 0 0 1 1 31

    03 001 01 0 0 0 0 0 1 1 41

    04 001 01 0 0 0 0 0 1 1 49

    05 000 00 1 0 0 0 0 0 0 00

    06 001 01 0 0 0 0 0 1 1 51

    07 001 01 0 0 0 0 0 1 1 59

    08 001 01 0 0 0 0 0 1 1 61

    09 001 01 0 0 0 0 0 1 1 69

    0a 000 00 1 0 0 0 0 0 0 00

    0b 000 00 1 0 0 0 0 0 0 00

    0c 001 01 0 0 0 0 0 1 1 71

    0d 001 01 0 0 0 0 0 1 1 79

    0e 001 01 0 0 0 0 0 1 1 81

    0f 001 01 0 0 0 0 0 1 1 89

    10 001 01 1 1 0 1 0 1 1 91

    11 000 00 1 0 0 0 0 0 2 FF

    12 001 01 1 1 0 1 0 1 1 99

    13 001 01 1 1 0 1 0 1 1 A1

    14 000 00 1 0 0 0 0 0 2 FF

    15 000 00 1 0 0 0 0 0 0 00

    16 000 00 1 0 0 0 0 0 0 00

    17 000 00 1 0 0 0 0 0 0 00

    IRQ to pin mappings:

    IRQ0 -> 0:2

    IRQ1 -> 0:1

    IRQ3 -> 0:3

    IRQ4 -> 0:4

    IRQ6 -> 0:6

    IRQ7 -> 0:7

    IRQ8 -> 0:8

    IRQ9 -> 0:9

    IRQ12 -> 0:12

    IRQ13 -> 0:13

    IRQ14 -> 0:14

    IRQ15 -> 0:15

    IRQ16 -> 0:16

    IRQ18 -> 0:18

    IRQ19 -> 0:19

    .................................... done.

    Using local APIC timer interrupts.

    calibrating APIC timer ...

    ..... CPU clock speed is 1666.0437 MHz.

    ..... host bus clock speed is 266.0630 MHz.

    NET: Registered protocol family 16

    EISA bus registered

    PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1

    PCI: Using configuration type 1

    mtrr: v2.0 (20020519)

    ACPI: Subsystem revision 20040211

    ACPI: Interpreter disabled.

    Linux Plug and Play Support v0.97 © Adam Belay

    PnPBIOS: Disabled

    PCI: Probing PCI hardware

    PCI: Probing PCI hardware (bus 00)

    PCI: Using IRQ router default [1106/3147] at 0000:00:11.0

    PCI->APIC IRQ transform: (B0,I17,P0) -> 16

    PCI->APIC IRQ transform: (B0,I17,P3) -> 19

    PCI->APIC IRQ transform: (B0,I17,P3) -> 19

    PCI->APIC IRQ transform: (B0,I17,P2) -> 18

    PCI->APIC IRQ transform: (B1,I0,P0) -> 16

    vesafb: framebuffer at 0xd0000000, mapped to 0xd0800000, size 16384k

    vesafb: mode is 800x600x16, linelength=1600, pages=2

    vesafb: protected mode interface info at c000:e2e0

    vesafb: scrolling: redraw

    vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0

    fb0: VESA VGA frame buffer device

    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)

    ikconfig 0.7 with /proc/config*

    VFS: Disk quotas dquot_6.5.1

    devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

    devfs: boot_options: 0x1

    Initializing Cryptographic API

    PCI: Via IRQ fixup for 0000:00:11.3, from 5 to 3

    PCI: Via IRQ fixup for 0000:00:11.2, from 5 to 3

    isapnp: Scanning for PnP cards...

    isapnp: No Plug & Play device found

    bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 14856 bytes, found (800x600, 14808 bytes, v3).

    Console: switching to colour frame buffer device 92x32

    pty: 1024 Unix98 ptys configured

    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled

    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

    ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

    RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize

    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

    VP_IDE: IDE controller at PCI slot 0000:00:11.1

    VP_IDE: chipset revision 6

    VP_IDE: not 100% native mode: will probe irqs later

    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

    VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1

    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio

    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio

    hda: SAMSUNG SP0802N, ATA DISK drive

    Using anticipatory io scheduler

    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

    hdc: HL-DT-ST CD-RW GCE-8524B, ATAPI CD/DVD-ROM drive

    ide1 at 0x170-0x177,0x376 on irq 15

    hda: max request size: 1024KiB

    hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)

    /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 >

    mice: PS/2 mouse device common for all mice

    serio: i8042 AUX port at 0x60,0x64 irq 12

    input: ImPS/2 Generic Wheel Mouse on isa0060/serio1

    serio: i8042 KBD port at 0x60,0x64 irq 1

    input: AT Translated Set 2 keyboard on isa0060/serio0

    md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27

    EISA: Probing bus 0 at eisa0

    NET: Registered protocol family 2

    IP: routing cache hash table of 2048 buckets, 16Kbytes

    TCP: Hash tables configured (established 16384 bind 32768)

    NET: Registered protocol family 1

    BIOS EDD facility v0.13 2004-Mar-09, 1 devices found

    Please report your BIOS at http://linux.dell.com/edd/results.html

    Resume Machine: resuming from /dev/hda6

    Resuming from device hda6

    Resume Machine: This is normal swap space

    PM: Reading pmdisk image.

    PM: Resume from disk failed.

    md: Autodetecting RAID arrays.

    md: autorun ...

    md: ... autorun DONE.

    RAMDISK: Compressed image found at block 0

    VFS: Mounted root (ext2 filesystem).

    Mounted devfs on /dev

    EXT3-fs: INFO: recovery required on readonly filesystem.

    EXT3-fs: write access will be enabled during recovery.

    kjournald starting. Commit interval 5 seconds

    EXT3-fs: recovery complete.

    EXT3-fs: mounted filesystem with ordered data mode.

    Mounted devfs on /dev

    Freeing unused kernel memory: 272k freed

    Real Time Clock Driver v1.12

    drivers/usb/core/usb.c: registered new driver usbfs

    drivers/usb/core/usb.c: registered new driver hub

    drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1uhci_hcd 0000:00:11.2: UHCI Host Controller

    uhci_hcd 0000:00:11.2: irq 19, io base 0000e400

    uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1

    hub 1-0:1.0: USB hub found

    hub 1-0:1.0: 2 ports detected

    uhci_hcd 0000:00:11.3: UHCI Host Controller

    uhci_hcd 0000:00:11.3: irq 19, io base 0000e800

    uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2

    hub 2-0:1.0: USB hub found

    hub 2-0:1.0: 2 ports detected

    usb 1-2: new full speed USB device using address 2

    usb 1-2: control timeout on ep0out

    uhci_hcd 0000:00:11.2: Unlink after no-IRQ? Different ACPI or APIC settings may help.

    EXT3 FS on hda5, internal journal

    Adding 506008k swap on /dev/hda6. Priority:-1 extents:1

    Linux agpgart interface v0.100 © Dave Jones

    agpgart: Detected VIA KT266/KY266x/KT333 chipset

    agpgart: Maximum main memory to use for agp memory: 203M

    agpgart: AGP aperture is 128M @ 0xe0000000

    kjournald starting. Commit interval 5 seconds

    EXT3 FS on hda7, internal journal

    EXT3-fs: mounted filesystem with ordered data mode.

    Supermount version 2.0.4 for kernel 2.6

    inserting floppy driver for 2.6.3-7mdk

    Floppy drive(s): fd0 is 1.44M

    FDC 0 is a post-1991 82077

    hdc: ATAPI 52X CD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)

    Uniform CD-ROM driver Revision: 3.20

    ide-floppy driver 0.99.newide

    drivers/usb/core/usb.c: registered new driver hiddev

    drivers/usb/core/usb.c: registered new driver hid

    drivers/usb/input/hid-core.c: v2.0:USB HID core driver

    NET: Registered protocol family 17

    PCI: Setting latency timer of device 0000:00:11.5 to 64

    CSLIP: code copyright 1989 Regents of the University of California

    PPP generic driver version 2.4.2

    bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).

    bootsplash: status on console 0 changed to on

    bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).

    bootsplash: status on console 1 changed to on

    bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).

    bootsplash: status on console 2 changed to on

    bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).

    bootsplash: status on console 3 changed to on

    bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).

    bootsplash: status on console 4 changed to on

    bootsplash 3.1.4-2004/02/19: looking for picture.... found (800x600, 11943 bytes, v3).

    bootsplash: status on console 5 changed to on

    SCSI subsystem initialized

    st: Version 20040122, fixed bufsize 32768, s/g segs 256

    nvidia: no version for "struct_module" found: kernel tainted.

    nvidia: module license 'NVIDIA' taints kernel.

    NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6629 Wed Nov 3 13:12:51 PST 2004

    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.

    agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode

    agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.

    agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode

    agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode

    atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).

    atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.

    NET: Registered protocol family 10

    Disabled Privacy Extensions on device c035fe60(lo)

    IPv6 over IPv4 tunneling driver

    cdrom: This disc doesn't have any tracks I recognize!

  4. Posted

    Hi,

     

    I've been looking in Google, and asking for help in some forums but I still don't have a solution for my problem. I've got a Thomson (or Alcatel?... never mind) silver SpeedTouch USB modem. It works fine in Windows (as you can see :P ), but my Mandrake doesn't detect it at all:

    > lspci -v

    Quote:
    (...)

    00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 23) (prog-if 00

    [uHCI])

    Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller

    Flags: bus master, medium devsel, latency 32, IRQ 19

    I/O ports at e400

    Capabilities: <available only to root>

     

    00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 23) (prog-if 00

    [uHCI])

    Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller

    Flags: bus master, medium devsel, latency 32, IRQ 19

    I/O ports at e800

    Capabilities: <available only to root>

    (...)

     

    > cat /proc/bus/usb/devices

    Quote:
    T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2

    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0

    D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

    P: Vendor=0000 ProdID=0000 Rev= 2.06

    S: Manufacturer=Linux 2.6.3-7mdk uhci_hcd

    S: Product=UHCI Host Controller

    S: SerialNumber=0000:00:11.3

    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA

    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

    E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

     

    T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2

    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0

    D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1

    P: Vendor=0000 ProdID=0000 Rev= 2.06

    S: Manufacturer=Linux 2.6.3-7mdk uhci_hcd

    S: Product=UHCI Host Controller

    S: SerialNumber=0000:00:11.2

    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA

    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

    E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

     

    The SpeedTouchConf script exits with an error:

    Quote:
    modem_run failed (code 253) Modem not found where expected.

     

    hotplug is running in my system.

    Only the red USB light on the modem flashes in Linux.

     

    I have almost none additional packages installed on Linux and the default kernel which comes with the MDK 10.0 Official distribution.

     

    Someone help me, please smile

     

    Greets

    gwr

×