I was trying to install WinWhistle 2416 and ran into a problem. I managed to get setup to copy the temp files to my hard drive, but on the reboot, setup continued to load and then stalled. The message displayed when it stalled was 'Setup is Starting Windows Whistler.' I left it for 2 hrs and it was still was stalled. Tried setup several times and it stalled @ the same place. Any ideas would be great. This is a fresh install from DOS onto a SCSI drive. My system specs r:

P3866
Supermicro P3DME MB
512 MB PC 100 Ram
TNT2U
SB Live
Adaptec 2940UW Scsi Controller
4gig Scsi drive
30 gig ATA 60 drive
Dual CDRs

Thankx!!!

excellent question, has been addressed. You should tell me what type of modem and/or network card you have, and whether it's ISA or PCI, or USB, or whatever.

I'll get back to you when you have that info

Ok...no modem on my system, but my nic card is built on my MB. It is PCI, in my device manager it is listed as: 'intel 8255x-based PCI Ethernet Adapter (10/100).' I could disable it in the bios and try an install.

Hope this helps,
Thankx.

Oh yea, there is no option to disable my nic card in my bios, my mistake. I did try an install with my ethernet cable disconnected, but still no luck.

Hope this helps.

remove your NIC completely from your computer, and then try again, once it's installed, you can put the network card back into the computer and it'll detect and everything will continue.

If not, the only other solution is to wait for a newer build.

yo JD he is gonna have an awfully hard time trying to remove his onboard nic.

yeah....I just noticed that....son of a b1tch then..

then you'll have to wait...

Thankxs for the help, there is a jumper on my board that disables the NIC, but that made no difference either. Guess I'm SoL, I'll wait for the next build. Hopefully the rumour of it having a revamped interface is true, as long as it's not a pain in the a$$.

Is there a jumper on the motherboard to disable the nic?

Yes sir, for this MB there is, I just double checked it in my User Manual.