does anyone know how to mount a usb flash stick in mandrake 9.1?

first, lock for the "usb-storage" modul with "lsmod". if you can't find the modul, probe with "modprobe usb-storage"

when the modul loadet, you can mount the usbdevice with "mount /dev/sdaX /mnt"

Well,

after

lsmod usb-storage O.K. (ergo present)
hotplug usb
mount -t vfat /dev/sdax /mnt/usb still do'nt work ...

please help

thanks

P.S. Mandrake 9.1

please post exactly what you typed and the error it gave you.

after hotplug usb

/var/log/messeges:

Sep 24 08:31:05 radoslavk kernel: hub.c: USB hub found
Sep 24 08:31:05 radoslavk kernel: hub.c: 1 port detected
Sep 24 08:31:06 radoslavk kernel: hub.c: new USB device 00:1f.4-2.1, assigned address 3
Sep 24 08:31:06 radoslavk kernel: usb.c: USB device 3 (vend/prod 0x67b/0x2517) is not claimed by any active driver.
Sep 24 08:31:08 radoslavk usb.agent[3288]: missing kernel or user mode driver usbcore
Sep 24 08:31:09 radoslavk usb.agent[3288]: missing kernel or user mode driver usbcore
Sep 24 08:31:09 radoslavk kernel: Initializing USB Mass Storage driver...
Sep 24 08:31:09 radoslavk kernel: usb.c: registered new driver usb-storage
Sep 24 08:31:09 radoslavk kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Sep 24 08:31:09 radoslavk kernel: Vendor: Prolific Model: USB Flash Disk Rev: P1.0
Sep 24 08:31:09 radoslavk kernel: Type: Direct-Access ANSI SCSI revision: 02
Sep 24 08:31:09 radoslavk kernel: USB Mass Storage support registered.
Sep 24 08:31:09 radoslavk scsi.agent[3370]: bogus sysfs DEVPATH=
Sep 24 08:31:09 radoslavk scsi.agent[3372]: bogus sysfs DEVPATH=
Sep 24 08:31:25 radoslavk su(pam_unix)[3428]: session opened for user root by dusan(uid=503)
Sep 24 08:31:30 radoslavk usb.agent[3468]: Bad USB agent invocation, no action


THANKS!

Can you see your device in /proc/bus/usb/devices ?
post this file if in doubt.

x)

Hi again!

Sory for my late answer:

/proc/bus/usb/devices

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=ef80
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 1
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=067b ProdID=2515 Rev= 0.01
S: Manufacturer=Prolific Technology Inc.
S: Product=USB Embedded Hub
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=12ms
T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=067b ProdID=2517 Rev= 0.01
S: Manufacturer=Prolific Technology Inc.
S: Product=USB Mass Storage Device
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=ef40
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms

/proc/bus/usb/driver

usbdevfs
hub
usb-storage


Thanks!

Dusan

You should be good to go.
if /dev/sda1 does'nt work try /dev/sdb1.