To upgrade Windows 98/95

1. Remove inserted disc in DVD-ROM Drive and Connect to only master of seconary port.
2. Download the Firmware and Execution file to the same folder(ex: c:\>temp)
3. Check the Firmware and Execution files(d5lgf65b.hex & xferd5.exe)
4. Boot the computer as DOS(not windows dos mode)
5. Excute to xferd5.exe (eg: c:\temp\xferd5.exe firmware file name(d5lgf65b.hex)
if you downloaded this file in this directory)

eg: c:\temp\>xferd5 d5lgf65b(not include extension name) then press enter.


Prior to upgrading to Windows 2000/ME/XP

Note: If you have Windows 2000, ME, or XP already installed, you will need to create a bootable disk from another operating system like DOS, Win95 or Win98 in order to process this firmware update. Follow the steps below. After the bootable disk is created and the files are extracted to the bootable disk, follow the steps starting

1. Place: A blank floppy diskette in your 3.5¡± disk drive A:
2. Double-Click: My Computer Icon on your desktop
3. Right-Click: The drive letter that is the 3.5¡± drive.
4. Choose : Format.
5. Choose: Copy System Files Only, Click OK.
6. Download the Firmware and Execution file to the same folder(ex: c:\>temp)
7. Copy: The Firmware and Execution file to the new folppy diskette
8. Let: The PC Make the disk bootable.
9. Re-Boot your PC with the bootable disk in Drive A: (Note: you may need to change your boot sequence
in the CMOS Setup in order to boot to drive A. Please see your motherboard manual for instructions or
contact your PC manufacture for instructions on changing the boot sequence.)
10. At the A:\>xferd5 d5lgf65b(not include extension name) then press enter.