bit-tech News: First Look: Enermax Revolution 85+ power supply

Printed from http://www.compatdb.org/support/topics/186139_bit_tech_news_first_look_enermax_revolution_85_power_supply.html

bit-tech News: First Look: Enermax Revolution 85+ power supply - 09/04/08 11:28 AM

Hi all,

We have just published an early look at *Enermax's Revolution 85+ power
supply*. If you could post a link on your site that would be very much
appreciated.

*Link:*
http://www.bit-tech.net/hardware/2008/09/04/first-look-enermax-revolution-85-psu/1


*Picture:*
http://images.bit-tech.net/content_images/2008/09/first-look-enermax-revolution-85-psu/fp_img.jpg


*Quote:
*/It nudges the underside of 90 percent at 50 and 75 percent load, but
drops to a healthy 87+ at full load. This matches the Corsair HX1000W at
12V weighted full load but exceeds it on the rest. The 5V standby
dropped a little low, but was still well within ATX spec - there's not
much to criticise at all really, it did what it said on tin pretty solidly.

The biggest surprise was just how quiet it was at full load - it
definitely wasn't silent and there was some obvious bearing noise from
the Globe Fan (also a subsidiary of Enermax), but it wasn't intrusive
and the noise was mostly a general rush of air, rather than a tornado
like so many others.

The air was only warm to touch, not hot, even after a while left loaded
fully, and the sides and base remained only moderately warm to touch.
All in all, we're really quite impressed at this early stage./
*

*Cheers guys!

Tim Smalley
www.bit-tech.net