Goaks

Yeep, known problem, but don't know of a fix yet. ------------------ PIII650 256 Meg Ram Geforce DDR Guillemont 2 voodoo 2's in SLI mode ABIT BH6 Ultra 2 SCSI's MX300 Sound Internal zip 100 Dat Backup 4x4x24 CDRW 300 Watt power supply Hatachi 21" Super Scan Tekram 390 U2W SCSI Controler

I have the same problem in the game. I have a wingman extreme digital, and it will test perfectly, but when I go into a game the hat will not work. ------------------ PIII650 256 Meg Ram Geforce DDR Guillemont 2 voodoo 2's in SLI mode ABIT BH6 Ultra 2 SCSI's 300 Watt power supply Hatachi 21" Super Scan Techram 390 U2W SCSI Controler

Not just a problem with the GeForce and Win2K. My boy has a pIII600 and is using a viper 770 Ultra. I have the 368 Drives installed on his machine, and WIN98 and it locks up ramdomly on him. I have the Geforce DDR guillemont with the 378 drivers and a pIII650 with WIN2K, and it locks up randomly on me even when I am in a game using Glide and my 2 voodoo 2's in SLI mode. Leads me to believe it has nothing to do with the 3D drivers. It will also lock up at the desk top. ------------------ PIII650 256 Meg Ram Geforce DDR Guillemont 2 voodoo 2's in SLI mode ABIT BH6 Ultra 2 SCSI's 300 Watt power supply Hatachi 21" Super Scan Techram 390 U2W SCSI Controler

I cant seem to ajust the lighting properly in Q3. The slider in the graphics option menu moves in either direction all the way, but the lighting only ajusts a fraction of what it should. Anyone else run into this? I am using a GeForce DDR by guillemont.

I dont get any conflicts, just that code 10 crap. Are you using the default drivers, ie. INF files, that came with WIN2K? This is driving me nuts. Only problem I really have now. BTW, the card should use just one IRQ.

Was working find under WIN2K build 2128. Updated to final and now get: This device could not start (Code 10). Irq and memory addresses have no confilicts. Uninstalled installed so many times, wearing out the drivers ... ;-0) Went to MS site, and error says problems with drivers: If the error message occurs because of a bad device driver, it is generally because a specific subdriver in the driver stack does not succeed IRP_MN_START_DEVICE. It can be difficult to determine which driver in the stack is at fault. This behavior can occur if a driver in the driver stack is corrupted or invalid for this device. Anyone get this working in the final?

Doesn't matter if I am in OpenGl or Glide, games lock up after a few minutes of play. ;-(

Sorry SHS, I did not mean to offend you. I understand your point as I develope operating system software to enhance IBM's operating systems on the mainframes. I do however feel this is a different sort of animal. We are all trying to get a jump on the final release, and report problems that we run into. It is in the best interest of us all to have as many different configurations as possible run the software. Also, it's not likely that any one of us will not purchase the product when it comes out, as you know, these RC's will expire at some point and time. Thanks Ed

I noticed you closed my thread asking how to RC3. Was there something wrong with this?

Wife cleaned office, missing some notes. I am runing build 2128, where can I get RC3? Thanks

Yes this is a dual pII400 system as well.

I have the 3.56 driver installed for my viper 770 Ultra, also aplied the DX7 patch. But after a few minutes of play my machine just locks up. Runs great until then, but can't seem to figure out what is causing the lockups. Anyone come accross this problem. I am runing build 2128 as well.

Atually I have a Helios dual processor board. They were first made by Micronics then Diamond bought them out, then decided they did not want to be in the mother board business. They have four memory slots and will take 256 meg dimms. It will also support pII or pIII processors, I am currently runing dual pII 400, but am planing a migration to pIII 500's soon. I am not sure of what scsi card you have but remember if you mix U2 and U all divices will run at only U speeds. I have a 2940 U2W which as different connectors for a U2 cable and a U cable. The 10k drives will not increase your data threw put, but will decrease you access and seek times. I just purchase a 256 meg dimm,Kingston for $297 on an auction. True this is only 8ns memory, but for a server or normal applications such as you have, this is plenty fast enough. I am not sure what Diamond is selling those helios boards for now, but they work pretty darn good, and you dont have to have 2 cpu's to start with. They have a filler card so you can run one cpu then purchase another later.

Did anyone find out where to download the device drivers for the Intelli Mouse? Thanks

I am running a Viper 770 and every time I try to run Half Life in D3D mode, I get like 1 frame per second. Havent seen any fixes out from Sierra yet either. Might have to wait for some good TNT2 drivers. I am current with all the patches for HL too.