[Ronin]

I have an Elsa Gladiac Ultra card and when I enable the coolbits feature and try to overclock the card it will not keep the settings after a reboot. Now I don't even think the overclocking feature works because I can set the memory/chip clock to the max and the card should crash and not work at all but it seems to work fine but I see no difference in FPS.

Now before you say anything I'm using the 6.49 drivers and these drivers overclocked my Geforce 2 card without a problem and the settings stayed in place even after a reboot.

Any ideas, or another program I could use. Power Strip 2.78 does not work for overclocking the ultra card but it works ok for the Geforce 2 card?

Driver suggestions another program for overclocking would be great if anyone has an ideas.

Thanks,

...

------------------
My W2k & Whistler System:

Dual Intel 850's
Tyan Thunder 2400 MB
Onboard Intel 82559 NIC
512 Megs Ram
Adaptec 39160 Ultra 160
2 - 18 Gig Cheetah - U160
1 - 18 Gig Cheetah U2W
1 - Maxtor 60 Gig (IDE)
SB Live Platinum 5.1
Plextor 12/4/32 - Burner
Plextor 40x UW CD-Rom
10x Sony DVD Drive
Elsa Gladiac Ultra 64 Meg
Dual V2 Cards, for D2
Viewsonic PF815 22" Monitor
...
My Linux System:

PIII 733
Asus P3C4X MB
256 Megs PC133 Mem
Adaptec U2W Scsi Card
1 - 9 Gig Cheetah 10K
48x IDE CD-Rom
CL Geforce DDR
ESS 1371 Sound Card

[clutch]

I had the same thing happen with a GeForce SDR from a Dell PC. I could use any setting, but no difference. I put in a VisionTek GeForce SDR, and it worked fine. Same drivers (6.31) and same hardware config. In addition, I don't think you have enough processor to make the overclocking worth it, besides, the memory is running so close the max spec that it probably wont go any further.

------------------
Regards,

clutch

[Ronin]

Clutch,

Thanks for your responce but what you said does not help me out. Please read the post more clearly and you will see what I'm talking about.

[Wolf87]

I had the same problem with 6.47 Detonators drivers so that may be a characteristic of that series.

The 6.62 drivers overclock correctly with coolbits and hardware tab after replacement of NvCpl.dll by the one included with 6.31.