Jump to content
Compatible Support Forums
Sign in to follow this  
viabsb

Untitled thread

Recommended Posts

I am trying to burn a cd and I've got this message:

I really did not understand what happened. After 5 cd losted I gave up to burn.

Can you help me?

Best regards.

"

System

-----------------------

K3b Version:0.11.14

KDE Version: 3.5.0-4.2.el4.kde

QT Version: 3.3.5

 

cdrecord

-----------------------

scsidev: '/dev/hdc'

devname: '/dev/hdc'

scsibus: -2 target: -2 lun: -2

Linux sg driver version: 3.5.27

/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').

SCSI buffer size: 64512

Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright © 1995-2004 Jörg Schilling

Note: This version is an unofficial (modified) version with DVD support

Note: and therefore may have bugs that are not present in the original.

Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla

Note: The author of cdrecord should not be bothered with problems in this version.

TOC Type: 1 = CD-ROM

Using libscg version 'schily-0.8'.

Driveropts: 'burnfree'

atapi: 1

Device type : Removable CD-ROM

Version : 0

Response Format: 2

Capabilities :

Vendor_info : 'HL-DT-ST'

Identifikation : 'CD-RW GCE-8523B '

Revision : '1.00'

Device seems to be: Generic mmc CD-RW.

Current: 0x0009

Profile: 0x000A

Profile: 0x0009 (current)

Profile: 0x0008

Profile: 0x0002 (current)

Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).

Driver flags : MMC-2 SWABAUDIO BURNFREE

Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R

Drive buf size : 1951488 = 1905 KB

FIFO size : 4194304 = 4096 KB

Track 01: data 668 MB

Total size: 767 MB (76:04.92) = 342369 sectors

Lout start: 768 MB (76:06/69) = 342369 sectors

Current Secsize: 2048

ATIP info from disk:

Indicated writing power: 5

Is not unrestricted

Is not erasable

Disk sub type: Medium Type B, low Beta category (B-) (4)

ATIP start of lead in: -11524 (97:28/26)

ATIP start of lead out: 359849 (79:59/74)

Disk type: Short strategy type (Phthalocyanine or similar)

Manuf. index: 13

Manufacturer: Multi Media Masters & Machinary SA

Blocks total: 359849 Blocks current: 359849 Blocks remaining: 17480

Speed set to 4233 KB/s

Starting to write CD/DVD at speed 24.0 in real SAO mode for single session.

Last chance to quit, starting real write in 2 seconds.

1 seconds.

0 seconds. Operation starts.

Waiting for reader process to fill input buffer ... input buffer ready.

trackno=0

BURN-Free is OFF.

Turning BURN-Free on

Performing OPC...

Sending CUE sheet...

/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150

Writing pregap for track 1 at -150

Starting new track at sector: 0

Track 01: 0 of 668 MB written.

/usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error

CDB: 2A 00 00 00 01 74 00 00 1F 00

status: 0x2 (CHECK CONDITION)

Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00

Sense Key: 0x3 Medium Error, deferred error, Segment 0

Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0

Sense flags: Blk 0 (not valid)

resid: 63488

cmd finished after 28.143s timeout 200s

/usr/bin/cdrecord: A write error occured.

/usr/bin/cdrecord: Please properly read the error message above.

write track data: error after 761856 bytes

Writing time: 239.371s

Average write speed 34.6x.

Fixating...

/usr/bin/cdrecord: Success. test unit ready: scsi sendcmd: no error

CDB: 00 00 00 00 00 00

status: 0x2 (CHECK CONDITION)

Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00

Sense Key: 0x2 Not Ready, Segment 0

Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru 0x0

Sense flags: Blk 0 (not valid)

cmd finished after 0.025s timeout 200s

Fixating time: 34.034s

/usr/bin/cdrecord: Success. prevent/allow medium removal: scsi sendcmd: no error

CDB: 1E 00 00 00 00 00

status: 0x2 (CHECK CONDITION)

Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00

Sense Key: 0x2 Not Ready, Segment 0

Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru 0x0

Sense flags: Blk 0 (not valid)

cmd finished after 0.039s timeout 200s

/usr/bin/cdrecord: Success. start/stop unit: scsi sendcmd: no error

CDB: 1B 00 00 00 02 00

status: 0x2 (CHECK CONDITION)

Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00

Sense Key: 0x2 Not Ready, Segment 0

Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru 0x0

Sense flags: Blk 0 (not valid)

cmd finished after 0.039s timeout 200s

/usr/bin/cdrecord: Cannot eject media.

/usr/bin/cdrecord: fifo had 76 puts and 13 gets.

/usr/bin/cdrecord: fifo was 0 times empty and 2 times full, min fill was 82%.

 

cdrecord comand:

-----------------------

/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=24 -dao driveropts=burnfree -eject -overburn -data -tsize=342369s -

 

mkisofs

-----------------------

342369

INFO: UTF-8 character encoding detected by locale settings.

Assuming UTF-8 encoded filenames on source filesystem,

use -input-charset to override.

Using FPC_CROSSWIN32_2_0_1_0509000.RP;1 for Disco70/Windows/FreePascal/2.0.1/fpc_crosswin32-2.0.1-050923.src.rpm (fpc_crosswin32-2.0.1-050923.i386.rpm)

0.15% done, estimate finish Mon Feb 6 14:46:45 2006

0.30% done, estimate finish Mon Feb 6 14:18:03 2006

0.44% done, estimate finish Mon Feb 6 14:12:37 2006

0.59% done, estimate finish Mon Feb 6 14:07:00 2006

 

mkisofs comand:

-----------------------

/usr/bin/mkisofs -gui -graft-points -volid BackUp Linux Disco70 -volset -appid K3B THE CD KREATOR VERSION 0.11.14 © 2003 SEBASTIAN TRUEG AND THE K3B TEAM -publisher Marcio Carneiro <Marcio@Marcio.eng.br> -preparer K3b - Versão 0.11.14 -sysid CentOS -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bzbz6Ib.tmp -rational-rock -hide-list /tmp/kde-root/k3buWsMIa.tmp -iso-level 2 -path-list /tmp/kde-root/k3bor6ubc.tmp /root/.kde/share/apps/k3b/temp/dummydir0/

"

 

Share this post


Link to post

Some more information would help.

 

This is an internal cdrw device?

 

What version of Fedora are you using?

 

Is this the version of K3b that came with Fedora, or off their website?

 

What are you attempting to burn, an iso file? If so, are you trying to burn it as a data file or as an image file?

 

Is the media rated for the drive in terms of speed and large enough to hold the data that you are trying to burn, say an 800 mb cd-r disk?

Share this post


Link to post

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×