Jump to content
Compatible Support Forums
Sign in to follow this  
ddod

Dual Monitor issues (64-bit Suse 9.3 pro)

Recommended Posts

OK,

 

I have an HPxw6200 workstation with an nvidia 280nvs PCI-E video card w/ 2vga ports. I have been trying for days to get the dual monitors to work under suse 9.3 64-bit OS. I have come to the conclusion that the nvidia drivers just don't work yet (I get nothing but black screens when I tried to load them) so the twinview options are not available. I am using the generic "nv" driver for my card. So I am trying to use Zinerama to get my dual monitors to work. According to everything I have read, I need to create two device to represent each vga port as such:

 

Section "Device"

BoardName "Quadro NVS 280 PCI-E/Quadro FX 330"

BusID "PCI:64:0:0"

Driver "nv"

Screen 0

Identifier "card_0"

VendorName "NVidia"

EndSection

 

Section "Device"

BoardName "Quadro NVS 280 PCI-E/Quadro FX 330"

BusID "PCI:64:0:0"

Driver "nv"

Screen 1

Identifier "card_1"

VendorName "NVidia"

EndSection

 

 

However, when I do this I get the following error:

II) Primary Device is: PCI 40:00:0

(--) Chipset Quadro NVS 280 PCI found

(--) Chipset Quadro NVS 280 PCI found

(II) resource ranges after xf86ClaimFixedResources() call:

[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)

[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)

[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX

[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX

[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX

[5] -1 0 0xf2020000 - 0xf203ffff (0x20000) MX

[6] -1 0 0xf2000000 - 0xf201ffff (0x20000) MX

[7] -1 0 0xf2100000 - 0xf210ffff (0x10000) MX

[8] -1 0 0xf2200600 - 0xf22006ff (0x100) MX

[9] -1 0 0xf2200400 - 0xf22005ff (0x200) MX

[10] -1 0 0x80000000 - 0x800003ff (0x400) MX

[11] -1 0 0xf2200000 - 0xf22003ff (0x400) MX

[12] -1 0 0xf1000000 - 0xf1ffffff (0x1000000) MX(B)

[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX(B)

[14] -1 0 0xf0000000 - 0xf0ffffff (0x1000000) MX(B)

[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX

[16] -1 0 0x00000000 - 0x000000ff (0x100) IX

[17] -1 0 0x00003000 - 0x000030ff (0x100) IX

[18] -1 0 0x00004400 - 0x0000443f (0x40) IX

[19] -1 0 0x00004000 - 0x000040ff (0x100) IX

[20] -1 0 0x000044f0 - 0x000044ff (0x10) IX

[21] -1 0 0x0000482c - 0x0000482f (0x4) IX

[22] -1 0 0x00004818 - 0x0000481f (0x8) IX

[23] -1 0 0x00004828 - 0x0000482b (0x4) IX

[24] -1 0 0x00004810 - 0x00004817 (0x8) IX

[25] -1 0 0x000044e0 - 0x000044ef (0x10) IX

[26] -1 0 0x00004824 - 0x00004824 (0x1) IX

[27] -1 0 0x00004808 - 0x00004808 (0x1) IX

[28] -1 0 0x00004820 - 0x00004820 (0x1) IX

[29] -1 0 0x00004800 - 0x00004800 (0x1) IX

[30] -1 0 0x000044a0 - 0x000044bf (0x20) IX

[31] -1 0 0x00004480 - 0x0000449f (0x20) IX

[32] -1 0 0x00004460 - 0x0000447f (0x20) IX

[33] -1 0 0x00004440 - 0x0000445f (0x20) IX

 

Fatal server error:

Requested Entity already in use!

 

 

I know that xorg "nv" dirver is recognizing the two vga ports and the monitors. I just can't get access to them:

II) NV(0): I2C bus "DDC" initialized.

(II) NV(0): Probing for analog device on output A...

(--) NV(0): ...found one

(II) NV(0): Probing for analog device on output B...

(--) NV(0): ...found one

(II) NV(0): Probing for EDID on I2C bus A...

(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.

(II) NV(0): I2C device "DDC:ddc2" removed.

(--) NV(0): DDC detected a CRT:

...

(II) NV(0): Probing for EDID on I2C bus B...

(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.

(II) NV(0): I2C device "DDC:ddc2" removed.

(--) NV(0): DDC detected a CRT:

 

what is next?

 

Daniel

 

Here is my xorg.conf file:

 

Section "Files"

FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/local"

FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/Type1"

FontPath "/usr/X11R6/lib/X11/fonts/URW"

FontPath "/usr/X11R6/lib/X11/fonts/Speedo"

FontPath "/usr/X11R6/lib/X11/fonts/PEX"

FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"

FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"

FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/kwintv"

FontPath "/usr/X11R6/lib/X11/fonts/truetype"

FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/CID"

FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"

FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"

FontPath "/usr/X11R6/lib/X11/fonts/xtest"

FontPath "/opt/kde3/share/fonts"

EndSection

 

Section "Module"

Load "dbe"

Load "type1"

Load "freetype"

Load "extmod"

Load "glx"

Load "v4l"

EndSection

 

Section "ServerFlags"

Option "Xinerama" "true"

Option "AllowMouseOpenFail"

EndSection

 

Section "InputDevice"

Driver "kbd"

Identifier "Keyboard[0]"

Option "Protocol" "Standard"

Option "XkbLayout" "us"

Option "XkbModel" "pc104"

Option "XkbRules" "xfree86"

EndSection

 

Section "InputDevice"

Driver "mouse"

Identifier "Mouse[1]"

Option "Device" "/dev/input/mice"

Option "Name" "Logitech Optical USB Mouse"

Option "Protocol" "explorerps/2"

Option "Vendor" "Sysp"

Option "ZAxisMapping" "4 5"

EndSection

 

 

Section "Monitor"

DisplaySize 370 300

HorizSync 30-82

Identifier "Monitor[0]"

ModelName "HP HP L1925"

Option "DPMS"

VendorName "HWP"

VertRefresh 43-76

UseModes "Modes[0]"

EndSection

 

 

Section "Modes"

Identifier "Modes[0]"

Modeline "1280x1024" 136.57 1280 1368 1504 1728 1024 1025 1028 1068

Modeline "1024x768" 80.71 1024 1080 1192 1360 768 769 772 802

Modeline "800x600" 48.18 800 840 920 1040 600 601 604 626

Modeline "640x480" 30.25 640 664 728 816 480 481 484 501

EndSection

 

Section "Device"

BoardName "Quadro NVS 280 PCI-E/Quadro FX 330"

BusID "PCI:64:0:0"

Driver "nv"

Screen 0

Identifier "card_0"

VendorName "NVidia"

EndSection

 

Section "Device"

BoardName "Quadro NVS 280 PCI-E/Quadro FX 330"

BusID "PCI:64:0:0"

Driver "nv"

Screen 1

Identifier "card_1"

VendorName "NVidia"

EndSection

 

 

Section "Screen"

DefaultDepth 24

SubSection "Display"

Depth 15

Modes "1280x1024" "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Depth 16

Modes "1280x1024" "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Depth 24

Modes "1280x1024" "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Depth 32

Modes "1280x1024" "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Depth 8

Modes "1280x1024" "1024x768" "800x600" "640x480"

EndSubSection

Device "card_0"

Identifier "screen_A"

Monitor "Monitor[0]"

EndSection

 

Section "Screen"

DefaultDepth 24

SubSection "Display"

Depth 15

Modes "1280x1024" "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Depth 16

Modes "1280x1024" "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Depth 24

Modes "1280x1024" "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Depth 32

Modes "1280x1024" "1024x768" "800x600" "640x480"

EndSubSection

SubSection "Display"

Depth 8

Modes "1280x1024" "1024x768" "800x600" "640x480"

EndSubSection

Device "card_1"

Identifier "screen_B"

Monitor "Monitor[0]"

EndSection

 

 

Section "ServerLayout"

Identifier "Layout[all]"

InputDevice "Keyboard[0]" "CoreKeyboard"

InputDevice "Mouse[1]" "CorePointer"

Screen 0 "screen_A"

Screen 1 "screen_B" RightOf "screen_A"

 

EndSection

 

Section "DRI"

Group "video"

Mode 0660

EndSection

 

 

 

Share this post


Link to post

AFAIK the xorg nv driver does not support twinview which is what the card uses to display on two monitors at once. I couldn't get it to work without the 3d driver from nvidia. that said once its there you should be able to add something along the lines of

 

twinview "true"

 

to the conf file. Its been a while but google it - there are lots of instructions for twinview and nvidia cards.

Share this post


Link to post

Thanks for the response. I know how to get it to work if I could use the "nvidia" instead of the "nv". However the 64-bit "nvidia" driver apparently does not work on all harware yet and specifically has a hard time with mine. I have tried to load the "nvidia" drivers dozens of times with as many different errors. So unfortunately until they release a better 64-bit driver I am stuck with the generic ones (and therefore unable to use twinview).

Share this post


Link to post

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×