Help
okay, i'm using an AHA 2940AU scsi adapter and that is apparently supported. unfortunately it wont pick up the scanner i am trying to get to work. its a HP 6100c.
what is going on? i'm pulling my hair out. i've tried modprobing every scsi port i can find. anyone got any ideas?
Page 1 of 1
scsi scanner not detecting
#2
danleff 
- Carpal Tunnel
-
- Group: Moderators
- Posts: 2903
- Joined: 30-August 02
Posted 27 May 2004 - 12:28 PM
Since no one has responded yet, I will give this a try.
What Linux distro and version do you have? Kernel versions less than 2.4.20 apparently had a conflict with ide-scsi, so this may be an issue.
Do you have sane installed on the system?
I assume that you tried modprobe sg and have no output for the scanner when looking at dmesg?
What does lsmod show?
What Linux distro and version do you have? Kernel versions less than 2.4.20 apparently had a conflict with ide-scsi, so this may be an issue.
Do you have sane installed on the system?
I assume that you tried modprobe sg and have no output for the scanner when looking at dmesg?
What does lsmod show?
#3
Mel
- member
- Group: Members
- Posts: 173
- Joined: 03-January 04
Posted 28 May 2004 - 12:42 AM
You need Linux kernal V 2.2.19 or later which I assume you have.
For information, go to " http://www.kirchgessner.net/sanehpfaq.html#HPFAQ0AB ".
Share this topic:
Page 1 of 1