[r444]

Hi,
I have a PC running Mandrake 10.0 Community with kernel 2.6.3-4mdk, with a TV/FM card e SB Live 5.1. Everything is running perfect, for apps like xine and xmms, but there no sound for TV and radio apps (xawtv e gnomeradio). I tried almost everything, like changing modules.conf and switching off ALSA drivers, but nothing results. Now I using EMU10K1 driver and nothing at all.
For a good soul how wants to help me there is my system info:

lsmod:
Module Size Used by
md5 3872 1
ipv6 232352 6
sg 38044 0
vmnet 27504 12
vmmon 83768 0
sr_mod 17060 0
lp 12200 0
emu10k1 69348 1
ac97_codec 17804 1 emu10k1
af_packet 20520 2
hid 53312 0
raw 7616 1
ide-floppy 18752 0
ide-tape 34864 0
ide-cd 40548 0
cdrom 37184 2 sr_mod,ide-cd
floppy 59444 0
8139too 23712 0
mii 4992 1 8139too
nls_iso8859-1 3904 2
ntfs 85932 2
supermount 37876 1
intel-agp 17372 1
agpgart 31016 1 intel-agp
tuner 17292 0
tvaudio 21612 0
bttv 146956 0
video-buf 20388 1 bttv
i2c-algo-bit 9512 1 bttv
v4l2-common 6144 1 bttv
btcx-risc 4712 1 bttv
i2c-core 23044 4 tuner,tvaudio,bttv,i2c-algo-bit
videodev 9536 1 bttv
soundcore 9248 3 emu10k1,bttv
ppa 12296 0
parport_pc 32832 1
imm 12360 0
scsi_mod 114744 4 sg,sr_mod,ppa,imm
parport 38952 4 lp,ppa,parport_pc,imm
ehci-hcd 24196 0
uhci-hcd 29104 0
usbcore 99132 5 hid,ehci-hcd,uhci-hcd
rtc 11576 0
ext3 110376 4
jbd 54328 1 ext3

lspci:

00:00.0 Host bridge: Intel Corp. 82865G/PE/P Processor to I/O Controller (rev 02)
00:01.0 PCI bridge: Intel Corp. 82865G/PE/P Processor to AGP Controller (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.3 USB Controller: Intel Corp. 82801EB USB (rev 02)
00:1d.7 USB Controller: Intel Corp. 82801EB USB2 (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corp. 82801EB Ultra ATA Storage Controller (rev 02)
00:1f.3 SMBus: Intel Corp. 82801EB SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:0d.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
02:0d.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 08)
02:0e.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
02:0e.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)

dmesg:
.......
ppa: Version 2.07 (for Linux 2.4.x)
Linux video capture interface: v1.00
bttv: driver version 0.9.12 loaded
bttv: using 4 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:02:0e.0, irq: 18, latency: 32, mmio: 0xefefe000
bttv0: using: Askey CPH05X/06X (bt878) [many vendors] [card=24,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=003fffff [init]
bttv0: using tuner=23
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z
tuner: chip found @ 0xc0
tuner: type set to 23 (Philips PAL_DK (FI1256 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "remote0"
......

Creative EMU10K1 PCI Audio Driver, version 0.20a, 07:21:39 Mar 2 2004
emu10k1: EMU10K1 rev 8 model 0x8064 found, IO at 0xd400-0xd41f, IRQ 17
ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708)
emu10k1: SBLive! 5.1 card detected
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x1000000
lp0: using parport0 (polling).
lp0: console ready

........

I cut the dmesg info. Its huge, but I think the most relevant (for this problem) is here. If you dare to help me, please be gentle, I never compiled a kernel
Thanks
r444

[r444]

No replies?!!? Well, I never imagine how dificult my question was?

But, if someone still wants to help, here's more info:

I have a cable connecting de tv card out and the SB line-in.
How can I configure the module.conf, modprobe.conf and modprobe.preload ......
Here my conf.:

modprobe.conf
alias eth0 8139too
alias sound-slot-0 emu10k1
options bttv radio=1 card=24 tuner=23 gbuffers=4
install scsi_hostadapter /sbin/modprobe imm; /sbin/modprobe ppa; /bin/true
install snd-emu10k1 /sbin/modprobe --first-time --ignore-install snd-emu10k1 && { /sbin/modprobe snd-pcm-oss; /bin/true; }
install usb-interface /sbin/modprobe usb-uhci; /sbin/modprobe ehci-hcd; /bin/true
remove snd-emu10k1 { /sbin/modprobe -r snd-pcm-oss; } ; /sbin/modprobe -r --first-time --ignore-remove snd-emu10k1

modules.conf
probeall scsi_hostadapter imm ppa
probeall usb-interface usb-uhci ehci-hcd
above snd-emu10k1 snd-pcm-oss
alias eth0 8139too
alias sound-slot-0 emu10k1
options bttv radio=1 card=24 tuner=23 gbuffers=4

modprobe.preload
....
scsi_hostadapter
bttv
intel-agp

I think the problem could be in this files. But ??
Thanks,
r444

[raymondobasildon]

No answer for you - but I can share in your problem . . .

I have SUSE Linux 10.0 (2.6 Kernel)
Hauppauge TV Theatre BT878 PCI card

And everything works fine except I have no sound with the ktv (also tried xawtv with no difference). I do have product support so come Monday, if I get the answer, I'll be sure to post it here.

[raymondobasildon]

Using Hauppauge WinTV Theatre PCI card
SUSE Linux 10.0

This was the solution that I found. How well you can adapt it to your problem I don't know.

I was using kdetv. This has a menu bar. From that select:

Settings > kdetv >
Sounds . Mixer Driver Selection

Change
ALSA Mixer Plugin
to
OSS Mixer Plugin

From a thread on another forum, I found that it was the change from ALSA to OSS for the tv that would make the difference.

I hope this helps.

[danleff]

raymondobasildon, nice reply which I hope helps someone.

Just a note, look at the date of the last post from r444, which was over two years ago. Looks like he was onthe right track though.