DVDROM PROBLEM

#1 cavia_cobaja

stranger

Group: Members
Posts: 3
Joined: 12-December 02

Posted 12 December 2002 - 08:02 PM

Help me,

I have a problem with my atapi dvdrom it only run in pio mode in xp....

i donot know why i can happen because when i first install xp this problem doesnt exist.

#2 pmistry

old hand

Group: Members
Posts: 1047
Joined: 17-April 00

Posted 13 December 2002 - 06:05 PM

Make sure under your DVD drive that "DMA If Available" is selected. You may also want to poke around in your BIOS and make sure that "AUTO" is selected for your DVD drive.

#3 cavia_cobaja

stranger

Group: Members
Posts: 3
Joined: 12-December 02

Posted 13 December 2002 - 08:45 PM

hi,

i've done all your advice but the problem still occur, i think aspi is my problem, by the way i've used the latest aspi from adaptec and i STILL have this problem.
i try to edit my registry but this cant help me too.... :x

#4 pmistry

old hand

Group: Members
Posts: 1047
Joined: 17-April 00

Posted 15 December 2002 - 06:57 PM

Try using the ASPI drivers bundled with CDRWin.

#5 cavia_cobaja

stranger

Group: Members
Posts: 3
Joined: 12-December 02

Posted 16 December 2002 - 07:27 AM

hi,
thank for your advice, i've done you said and the problem still exist. i saw in microsoft site about my problem but in occur in winnt,not xp...

i really confuse about my problem. HELP ME OUT!
here the link:

http://support.microsoft.com/default.aspx?scid=KB;en-us;164378&

#6 yaktao

stranger

Group: Members
Posts: 11
Joined: 02-December 02

Posted 16 December 2002 - 04:54 PM

If u have installed this DVDROM as a slave . c hange it to secondary master. may be you should first of all leave all other cd-rom or slave alone. just the two master and start the XP . see if it works. any way it works on my Pc. then I connect the two slaves. and this cd-rom will stay DMA. but any way u should make sure that you have the correct configuration in Bios and XP Device manager. good Luck :x