Jump to content
Compatible Support Forums
Sign in to follow this  
notinthisworld

iptables GUI

Recommended Posts

You do realize that you don't need to run this with KDE, right? All you need to do is install the necessary libs and you can run this in any window manager.

Share this post


Link to post
Quote:
You do realize that you don't need to run this with KDE, right? All you need to do is install the necessary libs and you can run this in any window manager.

Yeah, i know that, but I prefer native Gnome programs.
Anyway, I found Firestarter and it looks goood/better and it also runs on KDE with the proper gnome libraries :-)

Share this post


Link to post

Anyone know of any similar programs that are not dependent on having X installed (perhaps using ncurses to generate a text based UI like the kernel menuconfig program)? The reason I ask is that I've been meaning to put up a firewall on my gateway/server box for ages but since I don't know the first thing about iptables beyond simple port forwarding and masquerading I keep putting it off. I've tried a couple of premade firewall scripts but all I succeeded in doing was killing net access to the whole network (including the machine they were installed on).

 

(Oh, and before you ask, the reason it doesn't have X installed is mainly because it only has a monochrome monitor and graphics card. While X can be made to work in such an environment applications are optimised for resolutions much greater than 720x400 and 1 bit colour)

Share this post


Link to post

Well, a couple of things I might suggest then without having used it myself. One, would remote administration be feasible? If so, could you use something with an HTML-based manager (like Smoothwall, the new version supports IPTables) or just use SSH with -X and use X forwarding to run the frontend from another machine.

Share this post


Link to post

Remote administration certainly is feasible, I use SSH for just that purpose however X forwarding might not be since I can't think of a way to get an X based program on there without a whole horde of dependency issues caused by not having X installed. RPM would throw a fit and compiling from source would fail since it would expect X libraries to be installed. I'll definitely be checking out the HTML adminitration though, that seems like a suitable solution to the problem.

Share this post


Link to post
Quote:
Anyone know of any similar programs that are not dependent on having X installed (perhaps using ncurses to generate a text based UI like the kernel menuconfig program)? The reason I ask is that I've been meaning to put up a firewall on my gateway/server box for ages but since I don't know the first thing about iptables beyond simple port forwarding and masquerading


look at freshmeat
I saw a php one not too long ago.
You run it in your web server, it generates the rules and e-mails them to you (so you can scp it to the server and install it)

I didn't like it - but that was ages ago, it might have gotten better.

Also - I think webmin was working on one.

Share this post


Link to post
Quote:
Anyone know of any similar programs that are not dependent on having X installed (perhaps using ncurses to generate a text based UI like the kernel menuconfig program)? The reason I ask is that I've been meaning to put up a firewall on my gateway/server box for ages but since I don't know the first thing about iptables beyond simple port forwarding and masquerading I keep putting it off. I've tried a couple of premade firewall scripts but all I succeeded in doing was killing net access to the whole network (including the machine they were installed on).

(Oh, and before you ask, the reason it doesn't have X installed is mainly because it only has a monochrome monitor and graphics card. While X can be made to work in such an environment applications are optimised for resolutions much greater than 720x400 and 1 bit colour)

Share this post


Link to post

Try "iptables". It's a VERY nice Curses-based menu system for adding/changing/deleting rules in iptables. Very nice. I haven't used it in a while but it might just be what you're looking for.

 

Quote:
Quote:
Anyone know of any similar programs that are not dependent on having X installed (perhaps using ncurses to generate a text based UI like the kernel menuconfig program)? The reason I ask is that I've been meaning to put up a firewall on my gateway/server box for ages but since I don't know the first thing about iptables beyond simple port forwarding and masquerading I keep putting it off. I've tried a couple of premade firewall scripts but all I succeeded in doing was killing net access to the whole network (including the machine they were installed on).

 

(Oh, and before you ask, the reason it doesn't have X installed is mainly because it only has a monochrome monitor and graphics card. While X can be made to work in such an environment applications are optimised for resolutions much greater than 720x400 and 1 bit colour)

Share this post


Link to post

just a quick query....have installed GuardDog and it's doing great, the only problem is i have to log into X as root to change my settings. According to the manual, when logged in as a normal user it should prompt you for the root password when you run it, but for me this doesn't happen, and i'm just informed that i don't have root priveleges and can't change anything.

 

Any suggestions on how to get the root password prompt back?

 

Cheers

Share this post


Link to post

Hi all,

1. Yesterday installed Feodra core 1 - my first Linux box ever ! laugh

2. Anybody knows if there is guarddog rpm for Fedora or something simmiliar to it built-in in Fedora ??

 

Thanks in advance.

Share this post


Link to post

ip tables

 

# Red Hat Linux firewall using iptables

#

# Created: October 2002

# Last Revised: August 2006

#

# Authors: Dennis G. Allard (allard@oceanpark.com) and Don Cohen (don@isis.cs3-inc.com)

#

# This script works on on servers running Red Hat 7.3, 8.0, 9.0, and

# RHEL ES 3 and 4. Variants of this script are in active use on

# many servers.

#

# No warranty is implied. Use at your own risk!!

 

# Using this script

# -----------------

#

# I save this file as /etc/sysconfig/iptables-precursor

# and then source it and run iptables-save to create

# /etc/sysconfig/iptables, which is an input file

# consumed by the script /etc/rc.d/init.d/iptables,

# which in turn makes use of the script /sbin/iptables-restore.

#

# Before mucking with setting up iptables, you should

# disconnect the machine from the internet. Examine

# and understand the current set of iptables rules

# before you reconnect to the internet.

#

# To configure the set of iptables rules:

#

# /etc/rc.d/init.d/iptables stop

# source /etc/sysconfig/iptables-precursor

#

# To save the current set of iptables rules for use at next reboot:

#

# iptables-save > /etc/sysconfig/iptables

#

# To dynamically restart iptables after modifying /etc/sysconfig/iptables:

#

# /etc/rc.d/init.d/iptables restart

#

# Note that /etc/rc.d/init.d/iptables is a script. You can read it to

# gain understanding of how iptables uses iptables-restore to restore

# iptables firewall rules at reboot.

#

# To examine the current set of rules in effect:

#

# /etc/rc.d/init.d/iptables status

#

# However, I prefer to show the current set of rules via:

#

# iptables -nvL -t filter

# iptables -nvL -t nat

#

# or

#

# iptables -vL -t filter

# iptables -vL -t nat

#

#

# To configure iptables to be used at next system reboot:

#

# chkconfig --add iptables

#

# To see if iptables is currently configured to start at boot, do:

#

# chkconfig --list iptables

#

# (You might have to do chkconfig --del ipchains to remove ipchains)

#

# The rest of this file is derived from my old ipchains script.

#

 

# A word about routing

# --------------------

#

# Note that this web page does not discuss routing decisions. Routing

# (see the 'ifconfig' and 'route' commands) decides which interface an

# incoming packet will be delivered to, i.e. if a given packet will be

# 'input' to this machine or be 'forwarded' to some interface for

# delivery to another machine, say on an internal network. You should

# have your routing configured before you attempt to configure your

# firewall.

#

# Caveat. DNAT and SNAT provide a way for the IPTABLES firewall to modify the

# Destination or Source IP addresses of a packet and, in this way, interact

# with routing decisions. See section below: 'More about NAT and routing'.

#

 

# The network

# -----------

#

# This firewall is running on a gateway machine having multiple ethernet

# interfaces, a public one, eth0, which is a DSL connection to an ISP,

# and one or more internal ones, including eth1, which is assigned to

# 192.168.0.1, an IP number on my internal private network. My public

# network has static IP numbers depicted below as x.y.z.... Actual

# IP numbers would, of course, be a sequence of four octets. For this

# script, I assume that the firewall is running on the same machine

# having the interfaces configued with my public IPs. For this reason,

# most of the rules below are INPUT rules. Were I to route some of my public

# static IP numbers to interfaces on one or more machines inside the

# firewall on the internal network, I would modify certain rules to be

# FORWARD rules instead of INPUT rules. I show some examples below of

# FORWARD rules. Finally, the script is just for a single server IP,

# hence all of the "/32" network masks below. A more realistic situation

# would involve using IP ranges and their corresponding network masks.

#

# The gateway at my ISP is x.y.z.1. I run a few web servers on

# x.y.z.w, a DNS server on x.y.z.n, and qmail on x.y.z.m.

#

# Using this file in a more complex network would require some

# modifications. Particular attention would need to be given to using

# the right the IP numbers and interfaces, among other things. :-)

#

 

# Preliminaries

# -------------

#

# To permit machines internal to the network to be able to

# send IP packets to the outside world, enable IP Forwarding:

#

# echo 1 > /proc/sys/net/ipv4/ip_forward

#

# Prevent SYN floods from consuming memory resources:

#

# echo 1 > /proc/sys/net/ipv4/tcp_syncookies

#

# I place the above echo commands into /etc/rc.d/rc.local

# so that they will be executed at boot time.

#

 

 

# The basic idea of this firewall

# -------------------------------

#

# Provide rules that are applied in the following order:

#

# ACCEPT all UDP packets for certain UDP services

#

# Currently the only UDP connections I accept are to my secure DNS

# server, tinydns. For an explanation of why tinydns is secure, see:

# http://www.faqts.com/knowledge_base/view.phtml/aid/8739/fid/699.

#

# DENY all other UDP packets.

#

# ACCEPT SYN packets just for certain TCP services

#

# SYN packets are specified via the -syn flag in the input

# rules defined below. Note that certain services can be

# further filtered by xinetd.

#

# DENY all other TCP SYN packets.

#

# ACCEPT all other TCP packets that are part of existing connections

#

# DENY all other TCP packets.

#

# In other words, we allow any TCP packet through that is part of an

# established TCP connection, but we are very selective in just which

# connections we permit to be made to start off with.

#

# A brief explanation of SYN packets goes as follows. TCP connections

# are initiated via a hand shaking protocol between the client and server

# programs at either end of the connection. The very first TCP packet

# is sent by the client to the server and is called a SYN packet,

# because it has the SYN flag set to 1 in the TCP packet header. We

# only allow SYN packets for the specific servers running on specific

# ports of specific hosts. Subsequently, we only permit further TCP

# packets in that are determined to be part of a connection whose

# initial SYN packet was already accepted and responded to by one of our

# servers. This is done via 'Stateful Packet Inspection' provided by the

# netfilter functionality added to linux as of kernel 2.4. By stopping all

# other packets in their tracks, we limit attempts to attack our internal

# network.

#

# There are subtle ways that Denial of Service attacks can be performed

# if an attacker is able to somehow gain access to a machine inside our

# network or otherwise hijack a connection. However, even in such

# cases, current research is leading to ways to greatly limit the effect

# of such attacks. For further reading, see: http://www.cs3-inc.com/ddos.html.

#

# For detailed background reading about iptables, please refer to:

# http://www.netfilter.org/documentation/HOWTO/packet-filtering-HOWTO.html

#

 

 

# begin oceanpark.com firewall rules (using iptables)

# ---------------------------------------------------

 

# Here we go...

 

#

# Configure default policies (-P), meaning default rule to apply if no

# more specific rule below is applicable. These rules apply if a more specific rule below

# is not applicable. Defaults are to DROP anything sent to firewall or internal

# network, permit anything going out.

#

iptables -P INPUT DROP

iptables -P FORWARD DROP

iptables -P OUTPUT ACCEPT

 

#

# Flush (-F) all specific rules

#

iptables -F INPUT

iptables -F FORWARD

iptables -F OUTPUT

iptables -F -t nat

 

 

# The rest of this file contains specific rules that are applied in the order

# listed. If none applies, then the above policy rules are used.

 

#

# Forward all packets from eth1 (internal network) to eth0 (the internet).

#

iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT

 

#

# Forward packets that are part of existing and related connections from eth0 to eth1.

#

iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT

 

#

# Permit packets in to firewall itself that are part of existing and related connections.

#

iptables -A INPUT -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT

 

# Note, in the above two rules, a connection becomes ESTABLISHED in the

# iptables PREROUTING chain upon receipt of a SYNACK packet that is a

# response to a previously sent SYN packet. The SYNACK packet itself is

# considered to be part of the established connection, so no special

# rule is needed to allow the SYNACK packet itself.

 

#

# Allow all inputs to firewall from the internal network and local interfaces

#

iptables -A INPUT -i eth1 -s 0/0 -d 0/0 -j ACCEPT

iptables -A INPUT -i lo -s 0/0 -d 0/0 -j ACCEPT

 

 

#

# Enable SNAT functionality on eth0

#

# SNAT (Source NAT) is used to map private source IP numbers of

# interfaces on the internal LAN to one of my public static IP numbers.

# SNAT performs this mapping when a client running on one of the

# internal hosts (x.y.z.c) initiates a TCP connection (SYN) through

# eth0.

#

iptables -A POSTROUTING -t nat -s 192.168.0.0/24 -o eth0 -j SNAT --to-source x.y.z.c

 

#

# Alternative to SNAT -- MASQUERADE

#

# If your firewall has a dynamic IP number because it connects to the

# internet itself via DHCP, then you probably cannot predict what the IP

# number is of your firewall's interface connected to the internet. In

# this case, you need a rule like the following that assigns the (an) IP

# number associated with eth0 to outgoing connections without you needing

# to know in advance (at time of writing this rule) what that IP number is:

#

# iptables -A POSTROUTING -t nat -o eth0 -j MASQUERADE

#

# Note that the above SNAT and MASQUERADE rules are applicable

# independent of how a host on the internal network is assigned its own

# internal IP number. The host could be assigned a static IP number on

# an internal nonpublic network (e.g. 10. or 192.168.) or it could be

# itself assigned a dynamic IP number from your own DHCP server running

# on the firewall, or it could even have a public static IP number.

# However, it seems unlikely that one would want to assign a public IP

# number to a host and then proceed to hide that number from the public.

#

 

#

# Deny any packet coming in on the public internet interface eth0

# which has a spoofed source address from our local networks:

#

iptables -A INPUT -i eth0 -s x.y.z.s/32 -j DROP

iptables -A INPUT -i eth0 -s x.y.z.c/32 -j DROP

iptables -A INPUT -i eth0 -s 192.168.0.0/24 -j DROP

iptables -A INPUT -i eth0 -s 127.0.0.0/8 -j DROP

 

#

# Accept all tcp SYN packets for protocols SMTP, HTTP, HTTPS, and SSH:

# (SMTP connections are further audited by our SMTP server)

#

iptables -A INPUT -p tcp -s 0/0 -d x.y.z.m/32 --destination-port 25 --syn -j ACCEPT

iptables -A INPUT -p tcp -s 0/0 -d 0/0 --destination-port 80 --syn -j ACCEPT

iptables -A INPUT -p tcp -s 0/0 -d 0/0 --destination-port 443 --syn -j ACCEPT

iptables -A INPUT -p tcp -s 0/0 -d 0/0 --destination-port 22 --syn -j ACCEPT

 

#

# Notice that the above rules are all INPUT rules. My current network

# does not require me to make use of FORWARD rules, since I run all

# publicly accessible servers directly on my firewall machine. But I

# promised above in the description of my network to give examples of

# rules used when there are servers running on machines on the internal

# network. Following are examples of FORWARD rules I would use if I ran

# mail, web, and ssh servers on machines on the internal network inside

# the firewall.

#

# iptables -A FORWARD -p tcp -s 0/0 -d x.y.z.m/32 --destination-port 25 --syn -j ACCEPT

# iptables -A FORWARD -p tcp -s 0/0 -d x.y.z.w/32 --destination-port 80 --syn -j ACCEPT

# iptables -A FORWARD -p tcp -s 0/0 -d x.y.z.w/32 --destination-port 443 --syn -j ACCEPT

# iptables -A FORWARD -p tcp -s 0/0 -d 0/0 --destination-port 22 --syn -j ACCEPT

#

#

# The first three of the above four rules would be used if my routing

# delivered packets having destination IP x.y.z.m, port 25, or IP

# x.y.z.w, port 80 or 443, to an interface connected to my internal

# network (i.e. the packet was being FORWARDed). The fourth of the above

# four rules is similar but operates on any destination IP, port 22.

#

# The difference between an INPUT rule and a FORWARD rule is that an

# INPUT rule applies to packets that are 'input' to this machine (the

# machine on which these iptables firewall rules are installed), whereas

# a FORWARD rule applies to packets that are being 'fowarded', i.e. to

# packets that are passing through this machine to some other machine,

# such as a machine on my internal network.

#

# If I ran my mail server on an internal machine, I would no longer

# need my previous INPUT rule for x.y.z.m and would use the above

# FORWARD rule instead.

#

 

#

# Begin Caveat, More about NAT and routing

#

# The above talk of routing is independent of the rules defined here.

# I.e., routing is determined by ifconfig, route, et. al. I have not

# yet seen any very good explanation of how to setup the static routing

# table (what you see as output from the `route` command). I will not

# attempt to remedy that lacuna at this time. If you know of some

# good documenation that completely and accurately explains the

# semantics of the ifconfig and route commands, i.e., explains what

# affect each has such that I can reliably predict what the output

# of `route` will be after executing a sequence of ifconfig and

# route commands, then please do let me know.

#

# What *can* be done by IPTABLES rules that has the 'feel' of routing is

# DNAT (Destintion NAT) and SNAT (Source NAT). DNAT and SNAT rules are,

# respectively, mechnisms to map the incoming destination IP number and

# outgoing source IP number to different IP numbers. For example, SNAT

# can be used to map an internal source IP number to any one of your

# external public IP numbers so that a workstation on your internal

# network will appear to servers on the internet to which it connects to

# have a source IP number equal to the mapped public IP number.

#

# DNAT goes the other way. It is a mechanism used typically to map

# public destination IP numbers to internal private IP numbers. (In

# fact, DNAT could also map public to public or private to private or

# private to public, but that is left as an exercise for the reader).

# So, for example, if you run a mail server on a machine configured with

# an internal IP number but wish to expose that service to the external

# world via a public IP number, DNAT is for you.

#

# Now, DNAT and SNAT are *not* routing but can *interact* with routing.

# Routing decides whether a packet is going to be INPUT to this machine

# or be FORWARDed to another machine. That decision is done by routing.

# Once that decision is made, and only then, are the IPTABLES filtering

# rules (FORWARD and INPUT rules) applied to a given packet. On the

# other hand DNAT is applied by a PREROUTING rule and SNAT by a POSTROUTING

# rule. It is now time for you to read the following Packet Filtering

# HOWTO section:

#

# http://www.netfilter.org/documentation/HOWTO/packet-filtering-HOWTO-9.html

#

# which states:

#

# It's common to want to do Network Address Translation (see the

# NAT HOWTO) and packet filtering. The good news is that they mix

# extremely well. [editor- The NAT HOWTO can be found at:

# http://www.netfilter.org/documentation/HOWTO/NAT-HOWTO.html]

#

# You design your packet filtering completely *ignoring* any NAT you

# are doing. The sources and destinations seen by the packet filter

# will be the `real' sources and destinations. For example, if you

# are doing DNAT to send any connections to 1.2.3.4 port 80 through

# to 10.1.1.1 port 8080, the packet filter would see packets going

# to 10.1.1.1 port 8080 (the real destination), not 1.2.3.4 port 80.

# Similarly, you can ignore masquerading: packets will seem to come

# from their real internal IP addresses (say 10.1.1.1), and replies

# will seem to go back there.

#

#

# Hence, INPUT/FORWARD rules would operate on destination IP numbers

# *after* a DNAT rule is applied. But if you don't have any DNAT rules,

# then INPUT/FORWARD would apply to the IP numbers as they are in the

# incoming packet.

#

# INPUT or FORWARD would be needed purely depending on whether your

# routing would cause the packet to stay on the machine where the

# firewall is installed or be forwarded to another machine. THAT

# decision is done by routing and *not* by DNAT or SNAT or anything

# else in this firewall script.

#

# It is perfectly possible for the machine having the firewall to have

# both public and internal IPs configured and/or for some packets to be

# INPUT and others to be FORWARDed.

#

# DNAT is done by a PREROUTING rule, so you should think of things as

# proceeding in the following order:

#

# 1. apply PREROUTING DNAT rules (if any) to map destination IP

# 2. apply routing decisions (see ifconfig et. al.)

# 3a. apply INPUT rules to packets having a destination IP on this machine

# 3b. apply FORWARD rules to packets having a destination IP elsewhere

# 4. apply POSTROUTING SNAT rules (if any) to map source IP

#

# (3a and 3b can be done in either order since they apply to a mutually

# exclusive set of packets)

#

# I *think* that's correct.

#

# End Caveat, More about NAT and routing

#

 

 

#

# Sometimes I run older versions of SSH on port 2200:

#

iptables -A INPUT -p tcp -s 0/0 -d 0/0 --destination-port 2200 --syn -j ACCEPT

 

#

# For imapd via stunnel (instead of xinetd-based imapd):

#

iptables -A INPUT -p tcp -s 0/0 -d 0/0 --destination-port 993 --syn -j ACCEPT

 

#

# For xinetd-based IMAP server (see /etc/xinetd.conf for who can use it):

#

#iptables -A INPUT -p tcp -s 0/0 -d 0/0 --destination-port 143 --syn -j ACCEPT

 

#

# For DHCP server:

#

iptables -A INPUT -i eth1 -p tcp --sport 68 --dport 67 -j ACCEPT

iptables -A INPUT -i eth1 -p udp --sport 68 --dport 67 -j ACCEPT

 

#

# For LDAP clients:

#

#iptables -A INPUT -p tcp -s 0/0 -d 0/0 --destination-port 389 -syn -j ACCEPT

#dga- worry about LDAP later (after I decode LDAP documentation (-;)

 

 

#

# DNS queries:

#

# Permit responses from our ISP's DNS server. When a client running on our

# host makes a DNS query, the outgoing query is allowed since we permit all

# outgoing packets. The reply will be a UDP connection back to the high

# numbered client port from which the query was made. So we only need to

# permit UDP packets from our ISP's DNS servers back to high numbered ports:

#

#iptables -A INPUT -p udp -s <ISP DNS server IP>/32 --source-port 53 -d 0/0 --destination-port 1024:65535 -j ACCEPT

#

# But since we trust our ISP DNS Server not not have been hacked and we may

# not be sure what our client IP range is, we loosen this to:

#

iptables -A INPUT -p udp -s <ISP DNS server IP>/32 --source-port 53 -d 0/0 -j ACCEPT

 

 

#

# Running a caching DNS Server

#

# We need to permit querying a remote DNS server. Since I am running

# a caching DNS server on x.y.z.d that makes requests for DNS lookups

# to external DNS servers, those servers send back responses via UDP to

# the high numbered client port on x.y.z.d where the caching server listens.

# I could of course increase security by running the dns cache on its own

# machine/IP and restricting to just that machine/IP.

#

iptables -A INPUT -p udp -s 0/0 --source-port 53 -d x.y.z.d/32 --destination-port 1024:65535 -j ACCEPT

 

 

#

# Running a DNS server (tinydns)

#

# When we run a DNS server, we have to accept UDP from anywhere to port 53

#

iptables -A INPUT -p udp -s 0/0 -d 0/0 --destination-port 53 -j ACCEPT

 

 

#

# Running a Master DNS Server to update slave DNS servers

#

# You may have your server colocated at an ISP and may arrange to have your

# ISP provide your primary and secondary DNS with the ISP DNS servers slaving

# off of your master DNS server. This has the advantage of letting you be

# in full control of the DNS zone files yet keeping the DNS servers exposed

# to the public outside of your network. To achieve this, in addition to

# permitting vanilla DNS responses from the ISP DNS serves, you also need

# to allow TCP connections from the ISP Master DNS Server:

#

# Allow DNS zone transfers via TCP from ISP Master DNS server:

#

# iptables -A INPUT -p tcp -s <ISP Master DNS server IP>/32 -d 0/0 --destination-port 53 --syn -j ACCEPT

 

 

#

# For some other custom server running here listening on port <port number>:

#

iptables -A INPUT -p tcp -s 0/0 -d 0/0 --destination-port <port number> --syn -j ACCEPT

 

#

# For FTP server, restricted to specific local hosts (and see /etc/xinetd.conf):

# (for public file transfers we use scp, sftp, and related SSH file transfer tools)

#

iptables -A INPUT -p tcp -s x.y.z.s/32 -d 0/0 --destination-port 20 --syn -j ACCEPT

iptables -A INPUT -p tcp -s x.y.z.s/32 -d 0/0 --destination-port 21 --syn -j ACCEPT

iptables -A INPUT -p tcp -s 127.0.0.1/8 -d 0/0 --destination-port 20 --syn -j ACCEPT

iptables -A INPUT -p tcp -s 127.0.0.1/8 -d 0/0 --destination-port 21 --syn -j ACCEPT

 

#

# For Samba (smbd and nmbd), restricted to specific local client hosts (x.y.z.c):

#

iptables -A INPUT -p tcp -s x.y.z.c/32 -d x.y.z.s/32 --destination-port 139 --syn -j ACCEPT

iptables -A INPUT -p udp -s x.y.z.c/32 -d x.y.z.s/32 --destination-port 137 -j ACCEPT

 

#

#Special cable modem rules. I used to have a third ethernet card,

#eth2, attached to a separate ISP via a cable modem and used the rules

#shown below to cause a specific Windows machine on my internal network

#(192.168.0.128) to send traffic out via DSL and get it back via cable.

#This violates ingres filtering rules but seems to work. It was neat

#since my cable modem had higher inbound bandwidth and it permitted

#me to do downloads without impacting my DSL inbound bandwidth.

#I no longer have that third interface, so no longer use this technique.

#

#iptables -A INPUT -i eth2 -s 68.65.209.39/32 -j DROP

#iptables -A INPUT -i eth2 -s 127.0.0.0/8 -j DROP

#iptables -t nat -A POSTROUTING -s 192.168.0.128/32 -d 0/0 -j SNAT --to-source 68.65.209.39

 

#

# Finally, DENY all connection requests to any UDP port not yet provided

# for and all SYN connection requests to any TCP port not yet provided

# for. Using DENY instead of REJECT means that no 'ICMP port

# unreachable' response is sent back to the client attempting to

# connect. I.e., DENY just ignores connection attempts. Hence, use of

# DENY causes UDP connection requests to time out and TCP connection

# requests to hang. Hence, using DENY instead of REJECT may have

# the effect of frustrating attackers due to increasing the amount of

# time taken to probe ports.

#

# Note that there is a fundamental difference between UDP and TCP

# protocols. With UDP, there is no 'successful connection' response.

# With TCP, there is. So an attacking client will be left in the dark

# about whether or not the denied UDP packets arrived and will hang

# waiting for a response from denied TCP ports. An attacker will not

# be able to immediately tell if UDP connection requests are simply

# taking a long time, if there is a problem with connectivity between

# the attacking client and the server, or if the packets are being

# ignored. This increases the amount of time it takes for an attacker

# to scan all UDP ports. Similarly, TCP connection requests to denied

# ports will hang for a long time. By using REJECT instead of DENY, you

# would prevent access to a port in a more 'polite' manner, but give out

# more information to wannabe attackers, since the attacker can positively

# detect that a port is not accessible in a small amount of time from

# the 'ICMP port unreachable' response.

 

iptables -A INPUT -s 0/0 -d 0/0 -p udp -j DROP

iptables -A INPUT -s 0/0 -d 0/0 -p tcp --syn -j DROP

 

 

# end oceanpark.com firewall rules (using iptables)

# -------------------------------------------------

Share this post


Link to post

ip chain

 

# Red Hat 7.1 Linux firewall using ipchains

# May, 2001

# configured by Dennis G. Allard and Don Cohen, http://oceanpark.com

#

# Permission to copy is granted provided that credit is given

# to the author and whatever HOWTOs are used to understand this

# stuff.

#

# No warrenty is implied. Use at your own risk!!

 

# This web page documents my old ipchains firewall. I have

# updated my firewall to use iptable and udpated the description

# of my firewall at http://oceanpark.com/notes/firewall_example.html.

 

# This file is /etc/sysconfig/ipchains, intended for

# consumption by the script /etc/rc.d/init.d/ipchains,

# which makes use of the script /sbin/ipchains-restore.

 

# In Red Hat 7.1, the man page for ipchains and for

# ipchains-restore does not document the syntax of this

# file. I had to read the script to understand better

# what is going on.

 

# The firewall that the Red Hat 7.1 installer set up for me

# in response to my request for a high level of security

# was too restrictive. And, I couldn't find any GUI tool

# in either GNOME or KDE to reconfigure the firewall.

# For example, the KDE menu item for editing my firewall

# showed an empty set of rules even though this file and

# the above startup script existed. So I had no confidence

# in the GUI firewall tools, resulting in my decision to edit

# this file manually.

 

# The network

# -----------

#

# This firewall was running on a gateway machine having two

# ethernet interfaces, an external one, eth0, which is

# my DSL connection to my ISP, and an internal one, eth1

# which is assigned to 198.211.65.1, an IP number on my

# class C network. I run a web server, DNS server, and

# sendmail on the firewall machine itself.

#

# Using this file in a more complex network would require

# some modifications. Particular attention would need to

# be given to using the right the IP numbers and interfaces,

# among other things. :-)

 

# Running this script

# -------------------

#

# Red Hat 7.1 runs /etc/rc.d/init.d/ipchains at system

# startup, which uses this file as input. You can

# turn ipchains on and off via chkconfig. See:

#

# chkconfig --list | grep ipchains

#

# You can restart the ipchains firewall via:

#

# /etc/rc.d/init.d/ipchains restart

#

# A good way to show your ipchains rules is with:

#

# ipchains -vnL

 

 

# Preliminaries

# -------------

#

# To permit machines internal to the network to be able to

# send IP packets to the outside world, enable IP Forwarding:

#

# echo 1 > /proc/sys/net/ipv4/ip_forward

#

# Prevent SYN floods from consuming memory resources:

#

# echo 1 > /proc/sys/net/ipv4/tcp_syncookies

#

# I place the above echo commands into /etc/rc.d/rc.local

# so that they will be executed at boot time.

 

 

# The basic idea of this firewall

# -------------------------------

#

# Provide rules that are applied in the following order:

#

# ACCEPT all UDP packets for certain UDP services

#

# DENY all other UDP packets.

#

# ACCEPT SYN packets just for certain TCP services

# SYN packets are specified via the -y flag in the input

# rules defined below. Note that certain services can be

# further filtered by xinetd.

#

# DENY all other TCP SYN packets.

#

# ACCEPT all other TCP packets (the default input chain policy.)

#

# In other words, we allow any TCP packet through that is part of an

# established TCP connection, but we are very selective in just which

# connections we permit to be made to start off with. IMPORTANT:

# ipchains is less powerful than iptables since iptables, introduced

# in linux kernel 2.4 provides for Stateful Packet Inspection. ipchains

# will allow packets in that are not part of an existing TCP connection.

# Although such packets will not normally be processed by an application,

# they can be used as part of a denial of service attack. We recommend

# that you use an iptables firewall, which is able to audit connections

# more completely. See:

#

# IPTABLES Firewall Example

#

# A brief explanation of SYN packets goes as follows. TCP connections

# are initiated via a hand shaking protocol between the client and server

# programs at either end of the connection. The very first TCP packet

# is sent by the client to the server and is called a SYN packet,

# because it has the SYN flag set to 1 in the TCP packet header. We

# only allow SYN packets for the specific servers running on specific

# ports of specific hosts. Subsequently, we only permit further TCP

# packets in that are determined to be part of a connection whose

# initial SYN packet was already accepted and responded to by one of our

# servers. By stopping all other packets in their tracks, we limit

# attempts to attack our internal network.

#

# There are subtle ways that Denial of Service attacks can be performed

# if an attacker is able to somehow gain access to a machine inside our

# network or otherwise hijack a connection. However, even in such

# cases, current research is leading to ways to greatly limit the effect

# of such attacks. For further reading, see: http://www.cs3-inc.com/ddos.html.

#

# For detailed background reading about iptables, please refer to:

# http://www.netfilter.org/documentation/tutorials/blueflux/iptables-tutorial.html

#

 

 

# oceanpark.com firewall rules (using ipchains)

# ---------------------------------------------

 

# Tell ipchains-restore what default policies to use...

:input ACCEPT

:forward ACCEPT

:output ACCEPT

 

# The above will accept anything not prevented by the following rules.

 

# Deny any packet coming in on the public internet interface eth0

# which has source address of our local network (attempt to spoof an

# address which should never come from any place but eth1) or which

# claims to be from the reserved local loop network 127.0.0.0.

-A input -i eth0 -s 198.211.65.0/24 -j DENY

-A input -i eth0 -s 127.0.0.0/8 -j DENY

 

# Accept all tcp SYN packets for protocols SMTP, HTTP, and SSH

# Note, SMTP connections are further audited by my SMTP server

-A input -s 0/0 -d 198.211.65.1/32 25 -p tcp -y -j ACCEPT

-A input -s 0/0 -d 0/0 80 -p tcp -y -j ACCEPT

-A input -s 0/0 -d 0/0 22 -p tcp -y -j ACCEPT

 

# If you query remote DNS servers, permit UDP responses from it

# -A input -s <remote DNS server IP> 53 -d 0/0 -p udp -j ACCEPT

 

# I had to add the following line to make my DNS server honor requests

# from the public internet.

-A input -s 0/0 -d 0/0 53 -p udp -j ACCEPT

 

# Open up IMAP server (see /etc/xinetd.conf for who can use it)

-A input -s 0/0 -d 0/0 143 -p tcp -y -j ACCEPT

 

# Open up FTP server (see /etc/xinetd.conf for who can use it)

-A input -s 0/0 -d 0/0 20 -p tcp -y -j ACCEPT

-A input -s 0/0 -d 0/0 21 -p tcp -y -j ACCEPT

 

# Allow all inputs from the internal and local interfaces

-A input -s 0/0 -d 0/0 -i eth1 -j ACCEPT

-A input -s 0/0 -d 0/0 -i lo -j ACCEPT

 

# If we wanted to use masqueading (can do even for legit internal IPs)

# -A forward -s 198.211.65.78 -j MASQ

 

# Finally, DENY all connection requests to any UDP port not yet provided

# for and all SYN connection requests to any TCP port not yet provided

# for. Using DENY instead of REJECT means that no 'ICMP port

# unreachable' response is sent back to the client attempting to

# connect. I.e., DENY just ignores connection attempts. Hence, use of

# DENY causes UDP connection requests to time out and TCP connection

# requests to hang. Hence, using DENY instead of REJECT may have

# the effect of frustrating attackers due to increasing the amount of

# time taken to probe ports.

 

# Note that there is a fundamental difference between UDP and TCP

# protocols. With UDP, there is no 'successful connection' response.

# With TCP, there is. So an attacking client will be left in the dark

# about whether or not the denied UDP packets arrived and will hang

# waiting for a response from denied TCP ports. An attacker will not

# be able to immediately tell if UDP connection requests are simply

# taking a long time, if there is a problem with connectivity between

# the attacking client and the server, or if the packets are being

# ignored. This increases the amount of time it takes for an attacker

# to scan all UDP ports. Similarly, TCP connection requests to denied

# ports will hang for a long time. By using REJECT instead of DENY, you

# would prevent access to a port in a more 'polite' manner, but give out

# more information to wannabe attackers, since the attacker can positively

# detect that a port is not accessible in a small amount of time from

# the 'ICMP pot unreachable' response.

 

-A input -s 0/0 -d 0/0 -p udp -j DENY

-A input -s 0/0 -d 0/0 -p tcp -y -j DENY

 

# end of firewall rules

Share this post


Link to post

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×