Jump to content
Compatible Support Forums
Sign in to follow this  
will2g

Fedora install problem

Recommended Posts

On Dell dimension 8300 :

P4 2.8c Mhz

1024 Mo RAM dual channel bus 400Mhz

Firewire

ati radeon 9800

1 pionner a05 dvd-rw writer IDE

1 samung dvd (cd writer) IDE

IBM IDE disk

Maxtor IDE disk

SATA controlleur off in bios

hypertrheading enable

 

So ...

1) install fedora first time ... all is ok, rpms has been installed and system ask me to reboot

2) system reboot and start fedora starting screen who probbing my hardware (screen with white computer)

3) i click on details to see what system do .. and it freeze after firewire was ohci is started ...

4) i've try many times the install process whith diferent option (consult some post on bugzilla) (allowcddma, acpi=no etc ..) but not resolved ...

 

note : i've try to disable hypertreading .. start on smp .. none smp kernel but nothing change too ...

 

Thanks in advance for your help.

Share this post


Link to post
Share on other sites

problem has been resolve by myself .. after reboot to rescue mode and change init level 5 to 3

 

After that i will be able to setup the last ati radeon 9800 drivers ... and now x works great.

 

 

Now i've another problems :

 

from dmesg :

Unsupported Intel chipset (device id: 2578), you might want to try agp_try_unsupported=1.

 

and

 

usb.c: registered new driver audio

usbaudio: device 2 audiocontrol interface 0 has 1 input and 1 output AudioStreaming interfaces

usbaudio: device 2 interface 2 altsetting 1 channels 1 framesize 1 configured

usbaudio: valid input sample rate 6400

usbaudio: valid input sample rate 48000

usbaudio: device 2 interface 2 altsetting 1: format 0x00000040 sratelo 6400 sratehi 48000 attributes 0x01

usbaudio: device 2 interface 2 altsetting 2 channels 1 framesize 2 configured

usbaudio: valid input sample rate 6400

usbaudio: valid input sample rate 48000

usbaudio: device 2 interface 2 altsetting 2: format 0x00000010 sratelo 6400 sratehi 48000 attributes 0x01

usbaudio: device 2 interface 1 altsetting 0 does not have an endpoint

usbaudio: device 2 interface 1 altsetting 1 channels 1 framesize 2 configured

usbaudio: valid output sample rate 6400

usbaudio: valid output sample rate 48000

usbaudio: device 2 interface 1 altsetting 1: format 0x00000010 sratelo 6400 sratehi 48000 attributes 0x01

usbaudio: device 2 interface 1 altsetting 2 channels 2 framesize 2 configured

usbaudio: valid output sample rate 6400

usbaudio: valid output sample rate 48000

usbaudio: device 2 interface 1 altsetting 2: format 0x01000010 sratelo 6400 sratehi 48000 attributes 0x01

usbaudio: registered dsp 14,3

usbaudio: constructing mixer for Terminal 20 type 0x0301

usbaudio: registered mixer 14,0

usbaudio: constructing mixer for Terminal 13 type 0x0101

usbaudio: registered mixer 14,16

usb_audio_parsecontrol: usb_audio_state at f73c7200

audio.c: v1.0.0:USB Audio Class driver

usb.c: registered new driver dabusb

dabusb.c: v1.54:DAB-USB Interface Driver for Linux ©1999

usb-uhci.c: interrupt, status 2, frame# 1371

usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 218 ret -84

usb.c: USB disconnect on device 00:1d.2-2 address 3

hub.c: new USB device 00:1d.2-2, assigned address 4

usbaudio: device 4 audiocontrol interface 0 has 1 input and 0 output AudioStreaming interfaces

usbaudio: device 4 interface 1 altsetting 1 channels 2 framesize 2 configured

usbaudio: valid input sample rate 48000

usbaudio: device 4 interface 1 altsetting 1: format 0x01000010 sratelo 48000 sratehi 48000 attributes 0x00

usbaudio: registered dsp 14,19

usbaudio: constructing mixer for Terminal 2 type 0x0101

usbaudio: no mixer controls found for Terminal 2

usbaudio: constructing mixer for Terminal 4 type 0x0302

usbaudio: registered mixer 14,32

usbaudio: constructing mixer for Terminal 5 type 0x0603

usbaudio: no mixer controls found for Terminal 5

usb_audio_parsecontrol: usb_audio_state at f73c7400

 

 

and it seems that modprob use 50% CPU ...

 

What can i do to resolve ????

;(

 

thanks in advance for your help.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×