[Tech ARP] BIOS Option Of The Week - AGP Comp. Driving
No replies to this topic
Posted 20 July 2014 - 01:21 PM
We have just posted the *BIOS Option Of The Week - AGP Comp. Driving*.
Quote : Since 1999, we have been developing the BIOS Optimization Guide,
affectionately known as the BOG. From a meagre beginning of a single page,
it now covers over 440 BIOS options. As old BOG readers will know, we
started offering two editions of the BOG since Revision 8.0 - a simplified
edition and the complete edition.
Normally, the complete edition is only available to subscribers who help
sponsor the development of the guide through a small fee. However, that
changes today! From now on, we will post a BIOS option from the complete
edition of the BIOS Optimization Guide every weekend.
This week, we will be taking a look at the *AGP Comp. Driving* BIOS
setting. Here's an excerpt :
*The auto-compensation circuitry has two operating modes. By default, it is
set to automatically compensate for the impedance once or at regular
intervals by dynamically adjusting the AGP drive strength. The circuitry
can also be disabled or bypassed. In this case, it is up to the user
(through the BIOS) to write the desired drive strength value to the AGP I/O
pads. When you set this BIOS feature to Auto, the AGP drive strength values
are obtained from the auto-compensation circuitry. Normally, this is the
recommended setting as it allows the AGP controller to dynamically adjust
for motherboard impedance changes. However...*"
Link : *http://www.techarp.com/showarticle.aspx?artno=606*
Icon : *http://www.techarp.com/article/BOG_Weekly/BOG_weekly_big.png*
We hope you will post this news on your website. Please feel free to send
your news to news ( -at -) techarp.com and we will reciprocate.
Tech ARP : *http://www.techarp.com/* <http://www.techarp.com/>
Tech ARP : *http://techarp.com/* <http://techarp.com/>
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users